Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHinge & Post Repair in Yonkers, NY
Hinge and post repair in Yonkers typically costs between $225 and $650, depending on whether the post needs to be reset in concrete or just reinforced. Most hinge repairs we handle are straightforward and can be completed the same day we arrive. If your gate is dragging on the ground, sagging at the latch side, or the post itself wobbles when you push on it, you’re looking at a gate repair issue involving the hinge or post, not an opener problem.
At Calder Gate Repair Yonkers, we fix hinges and posts on gates of every size, from driveway swing gates in Crestwood to wrought-iron pedestrian gates in Park Hill. Nico Alvarez leads our Yonkers team, and every hinge or post job starts with a written price before any work begins. You can reach us at (585) 496-2148 for a free estimate.
This is a sub-service of our broader Gate Repair in Yonkers work, which covers the full range of opener brands, control boards, and safety systems.
When You Need Hinge & Post Repair
Hinges and posts are the structural foundation of every swing gate. When they fail, the gate’s geometry shifts, and that puts extra strain on the opener motor, the gearbox, and the limit switches. Here are the signs we see most often across Yonkers:
- The gate drags or scrapes the ground at the latch side. This is the classic symptom of a worn lower hinge or a post that has settled out of plumb. You’ll see scrape marks on the concrete or asphalt near the latch.
- The gate sags enough that the latch no longer lines up. In neighborhoods like Dunwoodie and Cedar Knolls, we see this after storms when soil shifts around the post footing, especially on sloped driveways.
- The post moves when you push on it. A healthy post should feel rock solid. If it flexes or shifts, water has likely compromised the footing or the post was never set deep enough below the frost line.
- The gate groans or squeaks loudly when opening. Hinges wear out, especially on heavy gates with steel frames. Once the internal bearing surfaces degrade, lubrication alone won’t fix the noise.
- You notice rust staining running down from the hinge area. That’s a sign the hinge hardware is corroding from the inside, common in Yonkers with our freeze-thaw cycles and road salt exposure.
If your opener seems to work but the gate struggles at the start of the cycle, the hinge and post alignment is the first thing we check before touching any electronics.
Our Hinge & Post Repair Process
Every job follows the same sequence so you know what’s happening at each step:
- On-site assessment and written quote. We inspect the hinges, post, footing, and gate frame. You get a written price before any work starts. No exceptions.
- We remove the gate and assess the post footing. For post issues, we dig down to the base of the footing to determine if it needs full replacement or can be stabilized with additional concrete and anchor bolts.
- Hinge replacement or repair. We replace worn hinges with heavy-duty hardware rated for your gate’s weight and size. For steel gates, we may weld reinforcement plates if the hinge mounting surface has weakened.
- Post reset or reinforcement. If the post is the problem, we reset it in fresh concrete at the correct depth, typically 36 to 42 inches for Yonkers frost conditions, and brace it while it cures.
- Re-hang the gate and dial in alignment. We reinstall the gate, adjust the hinges so it sits level, and test the full swing arc. Then we run the opener through multiple cycles to confirm the load on the motor is back within spec.
- Final walkthrough and photo documentation. You see before-and-after photos, get a digital invoice you can pay from a link, and have the 365-Day Done Right Promise in writing.
Hinge & Post Repair Pricing in Yonkers
The final cost depends on three things: how heavy the gate is, whether the post needs to be completely reset, and whether the hinge mounting surface on the gate itself needs reinforcement. Here’s what we typically see in Yonkers:
- Hinge replacement only: $225 – $380, including hardware and labor for a standard residential swing gate.
- Post stabilization (no full reset): $300 – $500, depending on access and how much concrete work is needed around the existing footing.
- Full post reset in new concrete: $450 – $650, including removal of the old footing, new concrete, and bracing time.
- Hinge mounting surface reinforcement on a steel gate: $175 – $300 additional, typically involves welding a plate to restore structural integrity.
If your gate uses a LiftMaster or Mighty Mule automatic gate repair opener, we also check the opener’s force settings after any hinge or post repair. A gate that was struggling against misaligned hinges often has stored over-force settings that need recalibration afterward.
Every quote is free, and the price we write down is the price you pay. Call (585) 496-2148 to get an exact number for your specific gate.
Why Hinge & Post Alignment Matters for Your Opener
Here’s the part most people don’t realize: a misaligned hinge doesn’t just make the gate look bad. It forces the opener to work harder on every single cycle. Over time, that extra load burns out capacitors, wears down gears, and trips the thermal overload on brands like FAAC and Elite. We’ve repaired LiftMaster openers in Yonkers where the root cause was a post that had shifted less than half an inch.
When we fix the hinge or post first, the opener frequently returns to normal operation without any electronic repairs. That’s why we never replace an opener without checking the gate’s structural alignment first. It saves you money and prevents a repeat failure.
What Sets Calder Gate Repair Yonkers Apart
Every hinge and post repair we complete carries the 365-Day Done Right Promise. If the repair fails within 365 days, we return at no charge. That’s in writing on every job. You also get The Relay Standard on every visit: a live, trackable arrival time, background-checked technicians in uniform, before-and-after photos documenting the work, and a digital invoice you can pay from your phone.
Calls to (585) 496-2148 are answered by a live person 24/7. Not a voicemail system, not a chat bot. A real human who can book your assessment or troubleshoot a question on the spot.
FAQs – Hinge & Post Repair
How much does hinge and post repair cost in Yonkers?
Hinge and post repair in Yonkers typically costs between $225 and $650. Hinge-only replacement runs $225 – $380, while a full post reset in new concrete runs $450 – $650. The total depends on your gate’s weight, post condition, and whether the hinge mounting surface needs reinforcement. Call (585) 496-2148 for a free written estimate on your specific gate.
Can you fix a sagging gate without replacing the post?
In many cases, yes. If the post is still structurally sound but the hinges have worn, we can replace the hinge hardware and reinforce the mounting surface to restore alignment. If the post itself is moving, a full reset is the only lasting fix. We’ll show you exactly what your gate needs during the free on-site assessment.
How long does a hinge and post repair take?
Most hinge replacements take 2 – 3 hours on site. A full post reset takes longer because fresh concrete needs time to cure before the gate can be re-hung, typically 24 – 48 hours. We’ll brace the post securely and schedule the re-hang for when the concrete has set properly. You’ll get a clear timeline in your written quote.
Is it cheaper to repair hinges or replace the gate?
Repairing hinges and posts is almost always significantly cheaper than replacing a gate. A new gate in Yonkers runs $2,000 – $8,000 depending on size and material, while hinge and post repair rarely exceeds $650. If the gate frame itself is severely rusted or structurally compromised, weld & rust repair may not be enough and replacement may be the better long-term option, and we’ll tell you that honestly. Call (585) 496-2148 for an assessment that gives you both options in writing.
Written by Nico Alvarez, Owner at Calder Gate Repair Yonkers, serving Yonkers.