Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterLock Repair in Yonkers, NY
Lock repair in Yonkers typically costs $120 – $310 depending on whether you’re dealing with a mechanical gate lock, an electric strike, or a maglock that has stopped responding. Most residential lock repairs here take under two hours on-site, and Calder Gate Repair Yonkers can usually have a uniformed technician at your door the same day you call (585) 496-2148.
We’re the gate repair specialists inside the Relay Home Co. family, and we handle lock work on Gate Repair in Yonkers jobs all week long. If your gate swings freely because the latch won’t catch, if your keypad codes in but the lock doesn’t release, or if you’re jamming a key into a cylinder that’s been chewed up by ten Yonkers winters, that’s the kind of problem we fix.
What makes our lock repair different is simple: you get a written price before we touch anything, a written guarantee on the repair itself, and a 365-Day Done Right Promise that says if the fix fails within a year, we come back free. No re-diagnosis fee. No argument about whether it’s “a new problem.” If the lock we repaired stops working, Calder makes it right.
When You Need Lock Repair
Not every gate repair issue is an opener problem. Sometimes the motor runs fine, the hinges are solid, and the real culprit is the lock assembly itself. Here’s what typically sends Yonkers homeowners to us:
- The gate won’t stay closed. The latch doesn’t fully seat into the strike plate, so the gate drifts open on its own. In neighborhoods like Crestwood and Park Hill where lots sit on slight grades, gravity makes this worse over time.
- Your key turns but nothing happens. The cylinder connects to the latch through a tailpiece, and when that strips or snaps, the lock becomes a decorative keyhole. You can spin the key all day and the gate won’t budge.
- The electric strike isn’t releasing. You enter the code, hear the keypad beep, but the strike doesn’t pull back. That’s often a failing solenoid or a wiring issue at the strike itself, not the opener.
- The maglock is buzzing or intermittently dropping. Maglocks need clean metal-to-metal contact and consistent power. When the armature plate shifts out of alignment, or the power supply starts failing, you get that loud buzz and a gate that unlocks at random.
- Freezing temps froze the lock again. Yonkers gets real cold snaps off the Hudson, and unsealed lock cylinders ice up solid. We regularly swap standard cylinders for freeze-resistant ones in Dunwoodie and Northeast Yonkers, where gates face the worst wind exposure.
- Someone tried to force the gate. Bent latch bars, pried strike plates, and jammed cylinders are common after attempted break-ins. This is a security issue first and a convenience issue second, and we treat it that way.
If any of these sound familiar, call us. A live person answers 24/7, not a voicemail or a chat bot, and we’ll tell you over the phone whether it sounds like a quick fix or a full lock replacement.
Our Lock Repair Process
Here’s exactly how a lock repair with Calder Gate Repair Yonkers goes, from the first call to the final invoice, including any needed gate realignment:
- You call (585) 496-2148 and describe the problem. A real human answers and asks a few targeted questions: what kind of gate, which brand of opener if you know it, what the lock is doing or not doing. If you don’t know the brand, no problem, we’ll identify it on site.
- We schedule you with a live arrival time. You get a trackable ETA, the kind where you can see your technician on the way. Not a four-hour window. You’ll know who’s coming before they ring the bell.
- The technician diagnoses the lock and writes a price. Before any work starts, you receive a written price. The number on the invoice is the number agreed to at the door. If the repair requires a part we don’t have on the truck, we tell you that upfront and schedule the return visit before we leave.
- We repair or replace the lock and test it under real conditions. We cycle the gate multiple times, test the keypad integration if there is one, and check the strike alignment. On maglocks, we verify the bond strength and power draw. On mechanical locks, we tighten everything back to spec and lubricate what needs it.
- You get before-and-after photos and a digital invoice. Everything is documented. You pay from a link on your phone. The written guarantee is attached to the invoice, so there’s no question later about what was covered.
We’re factory-familiar with Elite, Mighty Mule, LiftMaster, and FAAC automatic gate repair equipment, which matters when the lock is integrated with the opener’s control board rather than standing alone. A miswired strike on a FAAC system can fry the board if you’re not careful, and we know those systems well enough to avoid the expensive mistakes.
Lock Repair Pricing in Yonkers
Here’s what you can expect to pay for common lock repairs in Yonkers, before parts:
- Mechanical latch and strike adjustment: $120 – $185. Includes realigning the strike plate, tightening the latch assembly, and testing the full swing arc.
- Cylinder replacement (keyed lock): $140 – $220. Includes a new cylinder, cutting keys if needed, and adjusting the tailpiece connection to the latch. Freeze-resistant cylinders run toward the upper end.
- Electric strike replacement: $190 – $310. Includes the new strike, wiring check, and integration test with your existing keypad or intercom. Brand of strike and complexity of the wiring affect final cost.
- Maglock repair or replacement: $180 – $320. Covers realignment, armature plate resurfacing or replacement, and power supply testing. Full maglock replacement on a double gate can go higher.
- Full lock assembly replacement: $210 – $350. When the latch, cylinder, and strike are all worn out together, it’s usually cheaper to replace the assembly than to piecemeal it, and we’ll tell you that straight.
These are honest ranges, not bait. The exact price depends on your gate, your opener brand (an Elite system uses different components than a Mighty Mule), and how much of the surrounding hardware has worn with it. You’ll always get a written price before any work starts, and estimates are free. Call (585) 496-2148 and we’ll walk you through what your specific gate is likely to need.
A note on safety: gate locks are under physical stress, and electric strikes and maglocks carry low-voltage wiring that can still short and spark if handled wrong. If your gate opener has high-tension springs or cables involved, don’t attempt a DIY repair. Those components are under enough force to cause serious injury. Our technicians are trained for weld & rust repair and other gate work, so they handle these systems safely, and that’s where the job belongs.
FAQs – Lock Repair
Is it cheaper to repair or replace a gate lock?
In most cases in Yonkers, repairing a lock is cheaper when the problem is alignment, lubrication, or a single worn part like the cylinder or strike. Replacement makes more sense when multiple lock components are worn together, because labor to rebuild piece by piece often exceeds the cost of a new assembly. We’ll give you both options with written pricing before any work starts, and we’ll recommend whichever costs less over the long run, not whichever pads the invoice. Call (585) 496-2148 for an exact quote on your gate.
How much does gate lock repair cost in Yonkers?
Expect $120 – $310 for most residential gate lock repairs in Yonkers before parts. Simple latch adjustments start around $120, electric strike replacements land in the $190 – $310 range, and a full lock assembly swap typically runs $210 – $350. Your written estimate will itemize labor and parts separately so you know exactly what you’re paying for.
Can you fix my gate lock the same day?
Usually, yes. We dispatch background-checked, uniformed technicians across Yonkers with live, trackable arrival times, and same-day lock repair is available in most neighborhoods including Getty Square, Ludlow, and Lincoln Park. Call (585) 496-2148 and the live person who answers can confirm today’s availability and give you a real ETA.
What happens if the lock repair fails?
The 365-Day Done Right Promise covers it. If the lock we repaired fails within 365 days, Calder Gate Repair Yonkers returns at no charge and makes it right. This is stated in writing on every job we do, and the free second visit is included with every repair. No fine print, no “that’s a different issue now” runaround.
Do you work on all gate lock brands?
We’re factory-familiar with the equipment most Yonkers homeowners actually have, including LiftMaster, FAAC, Elite, and Mighty Mule systems. If your lock is integrated with a lesser-known opener, we’ll still repair it, and we’ll tell you upfront if a part needs to be ordered. Our team is trained across nine major gate opener brands, so the odds are high we’ve already seen your setup.
Written by Nico Alvarez, Owner at Calder Gate Repair Yonkers, serving Yonkers.