Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterAutomatic Gate Repair in Yonkers, NY
Automatic gate repair in Yonkers typically costs between $175 and $400 for most opener and sensor issues, with full motor replacements running higher depending on the brand and gate size. Calder Gate Repair Yonkers fixes automatic driveway gates, swing gate openers, and slide gate systems across Westchester County, usually with same-day or next-day availability. If your gate won’t open, closes halfway, or makes a grinding sound when it moves, we can help. Call us at (585) 496-2148 and we’ll give you a written price before anything gets taken apart.
This page covers how we approach automatic gate repair as part of our broader Gate Repair services, what we see most often in Yonkers neighborhoods like Crestwood, Park Hill, and Lawrence Park, and what you should expect to spend. Nico Alvarez and the Calder team have been working on gate openers since 2009, and we carry parts for the brands homeowners actually own here, including LiftMaster and FAAC systems.
When You Need Automatic Gate Repair
Most gate opener failures don’t happen overnight. They start as small annoyances that get worse over a few weeks. Here are the symptoms we hear most from Yonkers homeowners:
- Gate stops halfway or reverses for no clear reason. This often points to a limit switch problem, the small sensor that tells the gate where to stop, or an obstruction in the track. In the winter, frozen debris along the track edge is a common culprit in Yonkers driveways.
- Grinding, clicking, or humming sound with no movement. A humming opener that does not move the gate usually means the capacitor or gear assembly has failed. Clicking often indicates a relay issue on the control board.
- Remote or keypad stopped working. Sometimes it’s the battery or a reprogramming need. Other times the receiver board on the opener has failed. We test both before quoting a replacement.
- Gate opens on its own or does not close fully. This is a safety concern, not just a nuisance. Photo eye sensors misaligned by the freeze-thaw cycles common to Yonkers winters are a frequent cause, and it’s one we always check first.
- Slow or labored gate movement. Worn rollers, a low hydraulic fluid level on some models, or a motor losing torque can all cause this. Left alone, the motor burns out, and that’s a much bigger repair cost.
- Gate slams shut instead of closing softly. On swing gate systems, that’s usually a failed actuator arm or a broken hinge bearing. This one matters because a slamming gate can damage the gate itself or hurt someone standing nearby.
If any of these match what you’re seeing, call (585) 496-2148. We’ll ask a few questions, tell you the typical repair range based on what you describe, and get a technician scheduled with a live arrival time you can track.
Our Automatic Gate Repair Process
You should know exactly what happens from the first call to the final invoice. Here’s how gate repair near me in Yonkers, NY works with Calder Gate Repair Yonkers:
- You call, a live person answers. No voicemail, no chatbot. You describe the symptom, and we schedule a visit with a real arrival window you can track on your phone, not a four-hour “sometime between noon and whenever” situation.
- Background-checked technician arrives in uniform. Our tech is factory-trained on LiftMaster, FAAC, Mighty Mule, and Elite systems, among others. They’ll inspect the opener, track, hinges, sensors, and control board before touching anything.
- You get a written quote before any work starts. The price you approve at the door is the price on the invoice. We don’t do surprise add-ons, and we don’t start work without your sign-off.
- We repair using the right parts for your specific brand. A LiftMaster control board is not the same as a FAAC board, and swapping in a generic part creates more problems later. We use brand-matched components or direct equivalents that meet the opener’s original spec.
- We test the full open-close cycle and safety features, not just the one thing that was broken. That includes photo eye alignment, auto-reverse sensitivity, and limit switch calibration. In Yonkers, we also check for drainage issues around the gate posts that can cause long-term problems.
- You get a digital invoice you can pay from a link, plus your written 365-Day Done Right Promise. If any part of the repair fails within 365 days, we come back at no charge. That’s not an upgrade or a warranty upsell. It’s included on every job we do.
Automatic Gate Repair Pricing in Yonkers
We believe in putting numbers in writing. Here’s how much gate repair costs in Yonkers, NY, based on the jobs we’ve completed in the area:
| Repair Type | Typical Price Range |
|---|---|
| Remote or keypad reprogramming | $85 – $150 |
| Photo eye sensor realignment or replacement | $120 – $220 |
| Limit switch replacement | $150 – $260 |
| Control board repair or replacement | $250 – $550 |
| Motor replacement (swing or slide gate) | $400 – $900 |
| Full opener replacement | $800 – $1,600+ |
Several factors affect your final price. The gate’s size and weight matter, because a 16-foot solid steel slide gate demands more from an opener than a lightweight aluminum swing gate. The brand matters too. LiftMaster and FAAC parts can cost more than entry-level Mighty Mule components, but they also tend to last longer when paired with the right motor. Access matters as well: a gate panel on a narrow Yonkers hillside driveway often needs gate realignment compared to a flat, open one in Crestwood.
The labor estimate we give is a fixed quote, not an estimate that drifts. Parts get priced separately so you can see exactly what you’re paying for. Call (585) 496-2148 for a free phone estimate. We’ll ask about your gate type, the symptom, and the opener brand, and we’ll give you a realistic range before we ever send a truck.
Brands We Repair
We train on nine major gate opener brands, but here are the four we see most often in Yonkers driveways:
- LiftMaster: Known for their slide gate operators and myQ smart controls. Common failure points include the logic board and the travel module, both of which we stock or can source same week.
- FAAC: Italian engineering, very common on hydraulic swing gates in older Yonkers homes. Hydraulic fluid leaks and worn actuator seals are our top FAAC repairs.
- Mighty Mule: Popular for DIY installation, which means we often fix install mistakes: misaligned photo eyes, under-rated power supplies, and faulty arm brackets.
- Elite: Commercial-grade operators that show up on high-end residential properties in Park Hill and Ludlow. We handle their gate controllers and vehicle detector loops.
If you own a different brand, mention it when you call. We work on Viking, BFT, Linear, Ghost Controls, and DoorKing as well, and we’ll tell you honestly if a repair is worth doing or if replacement makes more sense.
Why Yonkers Weather Is Hard on Automatic Gates
Winter temperatures in Yonkers drop low enough to thicken hydraulic fluid on FAAC systems and cause metal track contraction on slide gates. Spring brings rain that washes silt and road salt into gate tracks, which accelerates roller wear and can short out low-mounted photo eye sensors. Summer humidity affects control board capacitors, especially on openers mounted in unventilated aluminum boxes that bake in direct sun.
We’ve been repairing gates in Yonkers long enough to know which failure patterns match which season, and we adjust our inspection accordingly. If your gate gets stuck in February, the cause is rarely the same as a gate that stops working in July, even when the symptom looks identical. That local experience is part of what you’re paying for, and it’s one reason we can often diagnose a problem in one visit instead of two or three.
FAQs – Automatic Gate Repair
How much does automatic gate repair cost in Yonkers?
Most automatic gate repairs in Yonkers run between $175 and $400 for common issues like sensors, limit switches, and remote reprogramming, while motor replacements run $400 to $900 and full opener replacements start around $800. The exact cost depends on your gate’s size, brand, and the specific part that failed. Call (585) 496-2148 for a written quote before any work begins, and that quote includes parts and labor, no surprises.
Can you fix my automatic gate the same day I call?
In most cases, we can schedule same-day or next-day service in Yonkers and surrounding neighborhoods like Bronxville, Tuckahoe, and Eastchester, depending on how early you call and which parts are needed. Emergency calls for security issues, like a gate stuck open, get priority. The live person who answers your call will give you a real arrival time, not a window, so you know exactly when the technician will show up.
Is it cheaper to repair or replace my automatic gate opener?
If your opener is less than 8 years old and the repair cost is under 60 percent of a new unit, repair usually makes sense, especially for quality brands like LiftMaster or FAAC. When the motor, control board, and multiple sensors fail together, or the opener is 10-plus years old, replacement often costs less over the next three years than repeated repairs would. We’ll give you honest numbers for both options and let you decide, without pressure.
Do you repair automatic gates in neighborhoods outside Yonkers?
Yes, we serve Yonkers neighborhoods including Crestwood, Park Hill, Lawrence Park, Ludlow, and Dunwoodie, plus nearby communities in lower Westchester like Mount Vernon, New Rochelle, and Bronxville. If you’re unsure whether we cover your street, call (585) 496-2148 and we’ll tell you right away.
What does the 365-Day Done Right Promise actually cover?
It covers any failure of the repair we performed. If the same problem comes back within 365 days of your original repair, we come back and fix it at no charge, including labor. It’s a written guarantee on every job, and the second visit is free, full stop. That applies whether you’re in Yonkers or one of the surrounding towns we serve.
Call Calder Gate Repair Yonkers for Automatic Gate Repair
When your automatic gate stops working, you want it fixed right and you want to know what it will cost before the work begins. That’s exactly how we operate. Calder Gate Repair Yonkers is part of the Relay Home Co. family, founded in 2009, and led by Nico Alvarez. Every job includes a written price before we start, a written guarantee on the repair itself, and a free second visit if the same repair fails within 365 days. You get a live person on the phone, a trackable arrival time, and a digital invoice you can pay from a link.
Call (585) 496-2148 now for a free estimate on your automatic gate repair. If you’d like to learn more about our full range of services, start with our Gate Repair in Yonkers page or visit our home page to see everything we do.
Written by Nico Alvarez, Owner at Calder Gate Repair Yonkers, serving Yonkers.