Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Electric Gate Repair for Yonkers Homeowners
An electric gate that won’t open, won’t close, or grinds and shudders halfway through its travel is more than a nuisance. It’s a security gap, a daily frustration, and a problem that only gets worse the longer you wait. Calder Gate Repair Yonkers fixes these issues the same day in most cases with our Yonkers Electric Gate Repair service, with a written price in your hand before a single bolt is turned. We’ve been the dedicated gate repair arm of the Relay Home Co. family since 2009, and Nico Alvarez leads our Yonkers team with one standard: if the repair isn’t right, we come back at no charge. Call (585) 496-2148 and a live person answers, 24/7.
The neighborhoods we work in daily – from Central Avenue up through Morningside Heights and over to East Harlem – have a lot of older gate systems, and nearby Eastchester Electric Gate Repair calls show similar patterns. In Yonkers, we see the same three problems repeat: motor failures on decade-old openers, limit switches knocked out of alignment by sagging gates, and keypads that die after a few hard winters. We know what to look for before we arrive. That’s why most repairs are done in a single visit.
Automatic Gate Repair
Automatic Gate Repair covers the full electromechanical system that opens and closes your gate without you leaving the car – the motor, the arm or slide mechanism, the sensors, the control board, and the remote receivers. When any one of those components fails, your gate becomes either a dead weight you have to muscle open or a hazard that doesn’t stop when it should. Most automatic gate repairs in Yonkers run $180 to $340 before parts, depending on whether we’re replacing a sensor, rewiring a connection, or rebuilding a hinge assembly.
Common Failure Points We Diagnose
On swing gates, the actuator arm shears internal gears over time, especially when wind catches a solid panel and works it like a lever. On slide gates, the chain or belt stretches and jumps teeth. We inspect the full travel path before quoting, so the number you agree to is the number on the invoice.
Same-Day Repair in Yonkers
If you call before noon, we can typically have a technician at your property the same day. That’s part of The Relay Standard: you get a live arrival time you can track, so you aren’t stuck watching from the window for a vague four-hour window.
Styles & brands we work with
Electric Gate Motor
Electric Gate Motor replacement or repair is what we do most often, because the motor is the muscle of the whole system and it works hard every single day. A failing motor usually gives you warning signs first: slow travel, a humming sound without movement, or a gate that stops and reverses mid-cycle. In Yonkers, motor repairs typically range from $220 to $380 before parts, and full motor replacement on common residential models usually lands between $450 and $850 depending on the brand and horsepower.
Motor Troubleshooting Before Replacement
We never recommend replacing a motor without first checking voltage at the board, condition of the capacitor if the motor uses one, and the amperage draw under load. A gate drawing high amps because a wheel is seized isn’t a motor problem – it’s a hardware problem. Fixing the real cause saves you the cost of a motor you don’t need.
When Replacement Is the Smarter Choice
A motor that’s 12 or 15 years old and leaking gear oil is usually cheaper to replace than to rebuild. We’ll tell you plainly if repair is throwing money at a failing unit. Either way, the decision is yours after we give you the written numbers.
Gate Access Control
Gate Access Control includes every way people get through your gate: keypads, intercom systems, remote transmitters, phone-based entry, vehicle detection loops, and the control boards that tie it all together. It’s the “who gets in” layer on top of the mechanical system. Access control repairs in Yonkers generally run $150 to $300 when we’re replacing a keypad or receiver, and can go higher for multi-tenant call-box systems or cellular-based entry.
Keypad and Intercom Fixes
Keypads that work intermittently are usually a wiring or power issue, not a bad keypad. We test voltage at the unit first and clean the contacts before quoting a replacement. Intercom systems with static or no audio often trace back to a corroded connection at the gate post.
Adding or Upgrading Entry Methods
If you want to add phone-based opening so you don’t need to carry a remote, we can wire in a cellular access module to most existing control boards. It’s a clean upgrade we do in a couple of hours, with a written price before we start.
Commercial Gate Operator
Commercial Gate Operator service covers the heavier-duty systems on apartment buildings, parking lots, storage facilities, and commercial properties in Yonkers, and our Electric Gate Repair - Tuckahoe team handles the same commercial-grade systems. These operators cycle more times in a week than a residential unit does in a month, and they need to be serviced with that workload in mind. Commercial operator repairs typically run $300 to $600 before parts, and a full commercial operator replacement on a standard slide gate starts around $1,200 depending on the brand and cycle rating.
Duty Cycle and Cycle Count
A residential motor on a commercial gate fails fast because it isn’t rated for continuous duty. We match the operator to the actual cycle count – how many times per day the gate opens – so you’re not back in the same spot in six months. For high-traffic properties, we also recommend scheduled maintenance to catch wear before it becomes an emergency.
Safety Compliance on Commercial Gates
New York has specific requirements for safety edges, photo eyes, and reversing systems on automated commercial gates. If your gate doesn’t reverse when it contacts an obstruction, that’s not a repair you put off – it’s a liability. Our technicians check entrapment protection on every commercial job and include the findings in your written quote. High-voltage and high-tension components on commercial operators should only be serviced by a trained professional; we don’t recommend anyone attempt these repairs on their own.
Brands We Service
We’re factory-familiar with Elite and Mighty Mule residential systems, which means we know the common failure patterns on those boards and actuators without a long diagnostic detour. Elite’s slide gate motors have a specific limit switch design that tends to drift over time; Mighty Mule’s swing arms are reliable but the older control boards don’t tolerate power surges well. We stock OEM parts for both.
On the commercial side, LiftMaster and FAAC dominate the Yonkers market, and we service them weekly. LiftMaster operators use a network of monitored entrapment sensors that need to be wired and tested correctly after any board replacement. FAAC hydraulic operators have a completely different diagnostic approach from the electromechanical units most companies start with – we know both. Whether you have LiftMaster, FAAC, Elite, Mighty Mule, or any other make, we can help.
Signs You Need a Pro Right Now
- Your gate opens but won’t close, or closes but won’t open. This is usually a limit switch or safety sensor problem. The limit switch is the small sensor that tells the gate when to stop. If it’s out of alignment, your gate doesn’t know the travel is complete and will refuse to complete the cycle. Left alone, the motor burns out trying to push past the stop point.
- The motor hums but nothing moves. A humming motor with no gate movement means the capacitor or the gearbox is failing. On a slide gate, it can also mean the drive chain has jumped the sprocket. Every time the motor hums without moving, it’s drawing locked-rotor current, which cooks the windings. This is a same-day call.
- The gate reverses mid-cycle or stops randomly. That’s an obstruction sensor giving a false reading, or a control board losing its mind. A gate that reverses halfway through every cycle is a sign the photo eyes are misaligned or there’s a wiring short in the loop detector. We track this down fast because it’s one of the most common calls we get from Fleetwood and Bryn Mawr Park.
- Your keypad or remote works only from close range. If you have to stand next to the gate for the remote to register, the receiver antenna or the transmitter battery is failing. It’s a cheap fix now and a full lockout later if the receiver dies completely.
- The gate makes a grinding or screeching noise every time it opens. Grinding means a mechanical part is dry or wearing – usually a bearing, a hinge, or a gear inside the motor. The noise itself won’t damage the gate, but the friction it represents will eventually strip the gear and leave the gate dead in whatever position it was in. That’s when the driveway gets blocked until someone can come out.
See the difference
Before
After
Before
After
Before
AfterOur Process, Step by Step
You know what we’re going to do before we do it. That’s the whole point of The Relay Standard. Here’s how it works on every Yonkers repair:
- 1
Call and talk to a person. Not a voicemail, not a chat bot. A real person answers 24/7, takes down what your gate is doing, and asks the right questions about the brand, the type of gate, and what you’ve tried. This lets us arrive with the right parts on the truck more often than we’d otherwise manage.
- 2
Track your technician’s live arrival time. Once the job is booked, you get a live, trackable arrival time. You’re not sitting at home for four hours waiting. You can see when we’re on the way and when we’ll pull up.
- 3
Diagnosis on site, with the number before the work. The technician tests voltage, inspects the mechanical components, and identifies the exact failure. Then you get a written price. That number is what you pay – parts, labor, everything. No discovery fee padding, no surprise line items.
- 4
Repair with parts we actually stock. Most of what we fix uses parts we carry. If your motor needs to be ordered, we tell you the timeline before we touch anything. We don’t start a job we can’t finish cleanly.
- 5
Digital invoice, before-and-after photos, and the 365-Day Done Right Promise. You get a digital invoice you can pay from a link, photos of the work, and a written guarantee. If the repair fails within 365 days, Calder returns at no charge. That’s not a warranty you have to beg for – it’s in writing on every job.
How Much Does Electric Gate Repair Cost in Yonkers?
A typical electric gate repair in Yonkers runs between $150 and $380 before parts, with most jobs landing in the $200 to $300 range. Here’s what that looks like in practice: replacing a failed keypad or receiver is usually $150 to $250. Repairing or replacing a swing gate actuator arm runs $280 to $480. Fixing a control board or relocating a limit switch is typically $180 to $340. Replacing a residential motor entirely lands between $450 and $850, and a commercial operator replacement starts around $1,200.
What drives the price? The brand matters – LiftMaster and FAAC parts cost more than some imports. The type of mechanism matters too: slide gates with chain drives are usually cheaper to repair than swing gates with buried arm actuators. Access from the street matters less than you’d think, but a gate that’s on a steep slope or set back from the road adds time.
How do you avoid overpaying? Get a written price before any work starts. We do this on every job by default, not as a courtesy. A free estimate means the diagnosis, the walkthrough, and the written number. If you approve it, we do the work. If you don’t, there’s no bill and no pressure. Call (585) 496-2148 and you’ll get exactly that.
Our Service Area Near Yonkers
Calder Gate Repair Yonkers serves most of southern Westchester and the adjacent Bronx neighborhoods. We’re regularly in home service territory from New Rochelle and Scarsdale up through Mamaroneck, and we cross the county line into Kingsbridge, Pelham Bay, Morris Park, and Throgs Neck. Typical response time within Yonkers is two hours or less. If you’re in Mount Vernon or City Island, we dispatch to you as well. For readers outside those zones, our Electric Gate Repair in Yonkers page covers the full scope of what we do.
Serving Yonkers, NY - Our Local Coverage Area
We’re based in the Yonkers area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Electric Gate Repair in Yonkers
Electric gate repair is the diagnosis and correction of any failure in the automated system that opens and closes a gate – the motor, control board, sensors, limit switches, remote receivers, keypads, and the mechanical components that carry the gate’s weight. In Yonkers, we handle everything from a dead remote to a full commercial operator replacement. Most repairs are completed in one visit with a written price agreed to before work begins.
Most residential repairs in Yonkers are completed in 60 to 90 minutes on site. Jobs that require a replacement motor or a special-order part may take two to three hours or require a second visit once the part arrives. We tell you the timeline explicitly before any work starts, so there’s no waiting without knowing.
Most electric gate repairs in Yonkers run between $150 and $380 before parts, with motor replacements ranging from $450 to $850 on residential systems. You’ll get an exact written price after diagnosis on site, before we do any work. If you don’t approve it, there’s no charge. Call (585) 496-2148 for a free estimate.
Yes, we service LiftMaster openers regularly, including their full line of residential and commercial operators. We’re factory-familiar with their monitored entrapment sensor systems and carry OEM parts for common LiftMaster repairs. The same goes for FAAC, Elite, Mighty Mule, and other major brands.
In most cases, yes. Calls placed before noon are usually same-day, and our 24/7 live line means you can report an emergency at 2 a.m. and a real person will answer. We prioritize gates that won’t close or that are stuck open, since that’s a security issue for your property. Call (585) 496-2148 and we’ll get someone out.
Yes, every repair carries the 365-Day Done Right Promise in writing. If the repair fails within 365 days, we return and make it right at no charge. That includes a free second visit if the repair doesn’t hold. The guarantee is printed on your invoice, not buried in fine print.
Clear the area around the gate so the technician can access the motor, hinges, and control panel without obstruction. If you have a key or manual release tool for the gate, have it available. And if you know the brand and approximate age of your opener, that helps us arrive with the right parts. Beyond that, just be ready to describe what the gate is doing – or not doing.
Schedule Your Electric Gate Repair Service in Yonkers Today
A gate that won’t open or close is a repair you shouldn’t sit on. Call Calder Gate Repair Yonkers at (585) 496-2148 for a free estimate, a written price before any work starts, and a real person on the line 24/7. We show up on time, fix it right, and back every job with the 365-Day Done Right Promise.
Written by Nico Alvarez, Owner at Calder Gate Repair Yonkers, serving Yonkers since 2009.