Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Yonkers, NY
Calder Gate Repair is a gate repair specialist serving Yonkers, NY, and every job starts with a written price before any work begins. Yonkers gates face conditions most towns don’t: steep hillside lots, pre-war ironwork, and Hudson River wind loads that stress hinges and posts in ways flat-ground installs never see. We’re part of the Relay Home Co. family, founded in 2009, and our Yonkers techs arrive in uniform with a live arrival time you can track from your phone. Call (585) 496-2148 any time, day or night, and a real person answers.
Why Yonkers Homes Are Different
Yonkers isn’t built on flat ground. Large sections of the city climb straight up from the Hudson, which means many driveway gates sit on slopes where gravity works against the hardware every single day. Add high wind loads off the river and you get hinge and post stresses that flatter towns like Tuckahoe or Eastchester rarely deal with. When a gate goes out of square on a hillside, the fix isn’t a simple adjustment. Our techs frequently re-hang gates by grinding hinges to match the settled angle of the post, especially in older neighborhoods like Park Hill and Lincoln Park.
The housing stock compounds the challenge. Yonkers is dominated by single- and multi-family homes built before 1940, many with narrow driveways, retaining walls, and original wrought iron or steel gates. These gates were often custom-fitted to uneven ground decades ago, and freeze-thaw cycles cause ground heaving that shifts posts out of alignment. In low-lying areas near the Saw Mill River and Bronx River, lingering moisture accelerates rust on hinges, wheels, and opener arms. A gate that worked fine in November can bind by February simply because the ground moved under it.
Styles & brands we work with
Our Main Yonkers Services
The three calls we field most from Yonkers homeowners are broken gate hardware, electric systems that stopped responding, and opener motors that run but don’t move the gate. Each service has its own dedicated Yonkers page below.
Gate Repair in Yonkers
Yonkers gates fail in predictable ways: sagging hinges on pre-war iron, wheels that seize from road salt and river moisture, and posts that lean after a nor’easter. Our techs carry replacement hinges, wheels, and hardware suited to older steel and wrought iron gates, and we quote the full repair price in writing before touching a bolt. When a gate won’t close properly, it’s a security issue, not just a nuisance. Every repair carries the 365-Day Done Right Promise. Gate Repair in Yonkers covers hinge work, post re-setting, wheel replacement, and full re-hanging.
Electric Gate Repair in Yonkers
Electric gates here face two persistent enemies: moisture near the Saw Mill River corridor and power fluctuations during winter storms. We diagnose failed limit switches, the small sensors that tell the gate when to stop, along with photo eyes, keypads, and loop detectors. Because many Yonkers homes have older wiring, our techs check the full low-voltage path, not just the obvious component. Electric Gate Repair in Yonkers includes wiring diagnostics, safety edge replacement, and control board troubleshooting.
Gate Opener Repair in Yonkers
When the opener motor hums but the gate doesn’t move, Yonkers homeowners usually face one of three issues: a stripped gear, a failed capacitor, or a control board damaged by a power surge. We service LiftMaster, FAAC, Mighty Mule, and Elite openers, and we stock common repair parts for faster turnaround. You’ll get a written diagnosis and a firm price before any repair is made. Gate Opener Repair in Yonkers details swing-arm, slide, and underground opener repairs.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Yonkers
Our Yonkers techs are factory-familiar with LiftMaster, FAAC, Mighty Mule, and Elite openers, among others. We stock common boards, arms, and gears locally so many repairs are completed same-day. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Yonkers, NY
| Service | Typical range in Yonkers |
|---|---|
| Hinge replacement on existing gate | $120 – $280 per hinge |
| Gate wheel or roller replacement | $95 – $220 |
| Post re-setting or concrete repair | $180 – $420 |
| Full gate re-hang and square-up | $260 – $580 |
| Opener motor replacement | $340 – $720 |
| Control board replacement | $180 – $380 |
| Safety edge or photo eye replacement | $140 – $310 |
| Limit switch adjustment or replacement | $90 – $190 |
| Keypad or remote programming | $70 – $150 |
| Full service call and diagnostic | $60 – $110 |
Yonkers prices run slightly higher than flat neighboring towns because hillside work takes longer and pre-war gates often need custom fitting rather than bolt-on fixes. Whatever the number, you’ll see it in writing before we start, and the invoice won’t surprise you.
Neighborhoods We Serve in Yonkers
We cover the full city, from the Hudson riverfront east to the Bronx River. Most calls get a same-day or next-day visit, and our live arrival tracking means no waiting through a four-hour window.
- Park Hill
- Lincoln Park
- Getty Square
- Dunwoodie
- Woodlawn Heights border area
Service Area – Cities Near Yonkers
Beyond Yonkers, Calder Gate Repair covers neighboring Westchester communities including Tuckahoe, NY, Mount Vernon, NY, Eastchester, NY, and Pelham, NY. Same pricing structure and guarantees apply across the service area.
Serving Yonkers, NY - Our Local Coverage Area
We’re based in the Yonkers area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Yonkers
Most Yonkers calls are reached the same day or next morning. We dispatch techs with a live arrival time you can track, not a four-hour window, and a real person answers the phone 24/7 to book or update.
Most repair work, including hinge, wheel, opener, and safety edge replacement, doesn’t require a permit. If you’re planning a full replacement or new gate installation, we’ll tell you what Yonkers requires before any work is scheduled.
Every job gets a written price before any work starts. That number is the number on your invoice. If the repair fails within 365 days, Calder returns at no charge under the 365-Day Done Right Promise.
For gate repair in Yonkers, call Calder Gate Repair at (585) 496-2148 for a free estimate. A live person answers, the price is in writing before the work begins, and every repair is backed for a full year.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Yonkers Customers Say
"Slide gate wheels replaced. Glides smoothly now."
- Mark T."Quote came in the app before the visit. No surprise at the end."
- Ginny L."Booking was easy and the job was done quickly."
- Seth R.