Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Yonkers
Electric gate repair in Yonkers typically runs $225 – $475 for most opener, sensor, and hinge work, and a large share of our jobs are completed the same day we diagnose them. If your gate is stuck open, stuck shut, or grinding against the driveway, call (585) 496-2148 and a live person answers 24/7. Our Electric Gate Repair team knows Yonkers’s hills, pre-war driveways, and Hudson River weather, and we quote a written price before any tool comes off the truck.
Yonkers is not a flat grid of suburban lots. It’s steep streets off the Hudson, narrow pre-war driveways that climb, and ornamental gates original to homes built before 1940. That changes how gates fail and how they need to be fixed. We’ll explain what’s wrong in plain language, show you the price in writing, and get the gate moving again without a four-hour waiting window.
Key Takeaways:
- Most electric gate repairs in Yonkers cost $225 – $475 before parts.
- We answer the phone 24/7 and schedule a live, trackable arrival time.
- Written price before work begins, written 365-Day Done Right Promise, free second visit if the repair fails.
- We service LiftMaster, FAAC, BFT, and Linear operators, plus custom ornamental gates on pre-war homes.
Why Calder Gate Repair Yonkers Is Yonkers’s Preferred Electric Gate Repair Company
Calder Gate Repair is the dedicated gate specialist inside the Relay Home Co. family, founded in 2009. We’re independently owned and operated, and we focus on one trade: electric gates. That focus means our techs have seen the exact failures Yonkers throws at gates: hinge posts heaving out of square on Park Hill slopes, rust seizing rack drives near the Saw Mill River, and wind off the Hudson pulling photocells out of alignment on tall ornamental gates.
Every Yonkers job runs on The Relay Standard: a live arrival time you can track, before-and-after photos, and a digital invoice you pay from a link. Your technician is background-checked and arrives in uniform. You get a written price before any work starts, a written guarantee on the repair, and a free second visit if the repair fails within 365 days under our 365-Day Done Right Promise. That’s not a sales pitch. It’s stated on every job.
Our techs are factory-familiar with nine major opener brands, including LiftMaster, FAAC, BFT, and Linear. So when a Yonkers homeowner calls with a dead opener or a gate that reverses for no reason, we usually know the likely culprit before we arrive. Nico Alvarez leads the Calder Gate Repair team serving Yonkers.
Styles & brands we work with
Automatic Gate Repair in Yonkers
Automatic gate repair in Yonkers deals with the full automated system: the opener itself, the safety sensors that stop the gate if a car or person is in the path, the keypad or remote that tells the gate to move, and the control board that coordinates all of it. On a steep Yonkers driveway, an automatic gate is also fighting gravity every time it opens, so a small mechanical problem becomes a big one faster than it would in Mount Vernon or Eastchester. Most automatic gate repairs in Yonkers run $250 – $450 before parts, depending on how many components are involved.
Sensor and Safety Loop Diagnostics
UL 325 requires entrapment protection on automatic gates, and we check photocells, safety edges, and loop detectors on every repair. On windy days near the Hudson, tall gates flex enough to knock a photocell beam out of alignment, and the gate starts reversing mid-cycle for no visible reason. We realign, test under load, and confirm the gate reverses properly when it meets resistance.
Keypad and Remote Reprogramming
Yonkers homes mix old hardwired keypads with newer wireless remotes. We reprogram, replace, and pair remotes on site, and we walk you through clearing old codes when a tenant or contractor left with a remote. On multi-family properties, we can program distinct access codes so each unit has its own entry credential.
Electric Gate Motor in Yonkers
Electric gate motor repair in Yonkers covers the motor that drives the gate leaf, whether it’s a swing arm on an ornamental iron gate in Park Hill or a slide motor on a wider driveway near Lincoln Park. On a steep grade, a motor that’s slightly undersized or running on corroded wiring works three times harder than it should, and it burns out. Replacing a gate motor in Yonkers typically costs $400 – $900 installed, depending on the gate weight, the operator type, and whether we’re also correcting the underlying stress that killed the first motor.
Undersized Motor Replacement on Steep Driveways
We regularly see builders or previous owners install a residential opener rated for a light aluminum gate, then hang a solid wrought iron gate on it. The motor strains, overheats, and fails within a few years. We size the replacement to the actual gate weight and the slope, and we often recommend a higher torque model from LiftMaster or FAAC that can handle a Yonkers grade without running hot.
Capacitor and Gear Failures
A motor that hums but doesn’t move usually points to a failed start capacitor or stripped drive gear. We replace both in place rather than insisting on a full operator swap when the motor itself is still sound. You get an honest read, not an upsell.
Trusted Brands We Service in Yonkers
Our techs work on LiftMaster, FAAC, BFT, and Linear operators every week, along with Ghost Controls, DoorKing, Elite, Viking, and Mighty Mule. We keep common control boards, remotes, safety sensors, and drive parts stocked for these brands so most Yonkers repairs finish in a single visit. Ornamental gates on pre-war homes often run on older FAAC or BFT hydraulics, and we still service those rather than telling you to rip out a working system for something new.
Common Electric Gate Repair Problems We See in Yonkers Homes
- Gate leaf dropping and binding on steep driveways. Freeze-thaw cycles heave the hinge posts in Yonkers’s clay-heavy soil, so the gate leaf drops a half inch and starts scraping against the pavement. We re-hang or grind the hinge to realign the leaf instead of just forcing the motor to push through it.
- Rust seizing rack and pinion drives near the rivers. Homes near the Saw Mill River and Bronx River sit in lingering moisture, and steel gears rust faster. A noisy slide gate is often a rust-buildup problem, and we clean or replace the rack section rather than letting it destroy the motor.
- Wind off the Hudson knocking safety photocells out of alignment. Tall ornamental gates flex in gusts, and a photocell moved by a quarter inch triggers false reversals. We reposition and lock down the sensor mounts so the gate stops mid-cycle only when it should.
- Pre-war gates settled out of square in Park Hill and Lincoln Park. Many gates in these neighborhoods are original to homes built before 1940. The ground settled, the posts leaned, and the gate no longer closes square. We re-hang these gates by grinding hinges and re-shimming posts, preserving the original iron instead of replacing it.
See the difference
Before
After
Before
After
Before
AfterPricing for Electric Gate Repair in Yonkers, NY
Here’s what you can expect to pay in Yonkers for common electric gate repairs:
- Safety sensor or photocell realignment: $125 – $225
- Keypad or remote reprogramming: $85 – $165
- Limit switch replacement: $150 – $260
- Hinge post realignment on a steep driveway: $250 – $450
- Control board replacement: $300 – $600
- Full operator or motor replacement: $400 – $900
The exact number depends on your gate’s weight, the operator brand, and how much of the original hardware is still sound. We don’t give ballpark quotes over the phone and then pad the invoice. We come out, diagnose, and hand you a written price before any work starts. Call (585) 496-2148 for a free estimate.
We Also Serve Cities Near Yonkers
Our team covers Yonkers and the surrounding area, including Tuckahoe, Mount Vernon, Eastchester, and Pelham. If you’re just over the line in any of these towns, we still quote written prices and back every repair with the same 365-Day Done Right Promise.
Serving Yonkers, NY - Our Local Coverage Area
We’re based in the Yonkers area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Yonkers
Freeze-thaw heaving is the cause in most cases. Yonkers soil absorbs water, freezes, expands, and shifts the hinge posts by a few millimeters. That shift makes the gate leaf drop just enough to drag against the driveway in winter, while summer dryness lets the post settle back. We fix this by re-hanging the gate and re-shimming the posts so the leaf clears the ground year-round. Call (585) 496-2148 if you’re noticing a scrape.
Yes, and we prefer to. Our crew recently re-hung a wrought iron swing gate on a Park Hill pre-war home that had settled so far out of square we had to grind the hinge post to realign the leaf. We matched the original ornamental scrollwork, replaced the LiftMaster operator, and tuned the loop detector so the gate swings smooth and silent despite the uphill grade. We would rather preserve the original iron than sell you a new gate that doesn’t match the house.
Yes, and it’s avoidable with the right maintenance. Moisture near the Bronx River and Saw Mill River stays in the air longer, accelerating rust on steel components. A noisy slide gate usually means rust buildup on the rack or the drive gear. We clean and reseal the rack when possible, or replace the affected section, and we use corrosion-resistant hardware on the reinstall. Call (585) 496-2148 and we’ll tell you if your rack is salvageable.
Yes, UL 325 requires entrapment protection on automatic gates, including photocells, safety edges, or both, depending on the gate type. Every Calder Gate Repair visit in Yonkers includes a check of your sensors, edges, and loop detectors to confirm the gate reverses when it meets resistance. If a sensor is out of alignment or failed, we fix it before we consider the repair complete.
Because the motor is working against gravity every time it opens, and if it’s undersized for the gate’s actual weight, it overheats and burns out. We’ve replaced many residential operators that were never rated for a solid iron gate on a 15-degree slope. The fix is to size the replacement to the real load and the grade, often stepping up to a higher-torque LiftMaster or FAAC unit. Get a free assessment by calling (585) 496-2148.
Call Calder Gate Repair Yonkers for a Free Estimate
If your electric gate is stuck, noisy, reversing for no reason, or just struggling on a steep Yonkers driveway, call (585) 496-2148. A live person answers any time, day or night. We’ll schedule a trackable arrival time, diagnose the problem, and hand you a written price before any work starts. Every repair carries the 365-Day Done Right Promise: if it fails within a year, we come back at no charge. Nico Alvarez and the Calder Gate Repair team serve Yonkers and the surrounding area with the transparency this hilly, pre-war city demands.
Written by Nico Alvarez, Owner at Calder Gate Repair Yonkers, part of the Relay Home Co. family since 2009.