Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Yonkers, NY | Calder Gate Repair Yonkers
Ghost Controls gate repair in Yonkers typically runs $185 – $390 for most board, arm, and limit switch fixes, and our crew handles it as an independent service provider, not a manufacturer affiliate. What separates our Ghost Controls work here is that Yonkers’s hills and pre-war gates create failure patterns you won’t see in flatter towns, and we diagnose them by phone before we ever roll a truck. Call (585) 496-2148 for a written quote.
Why Yonkers Residents Choose Us for Ghost Controls Service
We work on Ghost Controls openers every week across Yonkers, from Park Hill’s settled wrought iron to newer slide gates in Lincoln Park. That repetition means our techs don’t need a manual to know that a TSS1 solar kit blowing fuses on a Palmer Road slope is usually a binding hinge, not a bad panel. Nico Alvarez, who owns Calder Gate Repair Yonkers, serving Yonkers, NY, trained in electrical and mechanical systems at East Los Angeles College and has spent years learning the difference between a gate that looks fine and a gate that actually is fine. He still diagnoses most Ghost Controls problems over the phone in under five minutes.
We stock genuine Ghost Controls control boards and arm motors locally, so a Yonkers repair doesn’t wait on a ground shipment from Texas. When aftermarket parts make more sense for our winters, we say so, and we show you the price difference in writing before anything gets touched. Every job carries our 365-Day Done Right Promise: if the repair fails within a year, we return free.
Styles & brands we work with
Common Ghost Controls Gate Repair Problems We Solve in Yonkers
- Control board corrosion from river moisture. Yards near the Saw Mill and Bronx River corridors hold dampness longer than higher ground, and Ghost Controls boards aren’t sealed against that kind of sustained humidity. We see green corrosion on board terminals, shorted relays, and openers that work fine at noon and fault out after dark.
- Stripped plastic gears in TSS1 and TDS2 arm actuators. These arms use internal plastic gearing, and when a gate binds on an out-of-square post, the motor keeps pushing until the teeth shear. On Yonkers’s pre-war properties, settled posts and rusty barrel hinges are the usual culprits, not the motor itself.
- Solar panel undercharging on hillside gates. Many Yonkers driveways slope steeply, and mature trees or garage overhangs shade panels for most of the morning. A panel that’s partially shaded for a month leaves the battery barely holding a charge, and the opener starts acting dead on cloudy weeks.
- Limit switch misalignment after freeze-thaw heaving. When the ground under a gate post freezes and thaws through a Yonkers winter, the post shifts a fraction of an inch. The limit switch, which is the small sensor that tells the gate when to stop, now reads the travel wrong, so the arm over-travels or slams at the end of each cycle.
- Gate sag on steep slopes causing arm binding. On a hillside, gravity works against the gate constantly. Hinges wear faster, the gate drops, and the Ghost Controls arm has to lift the weight at an angle it wasn’t designed for. The result is a groaning motor, a tripped fuse, or an opener that starts one day and refuses to move the next.
Ghost Controls Service in Yonkers: What Local Conditions Mean for Your Equipment
Yonkers’ hilly terrain and the dense mix of multi-family homes mean many gates sit on steep slopes and take repeated wind loads off the Hudson, which puts hinge and post stress on equipment in ways you won’t find in Mount Vernon or New Rochelle. In Park Hill specifically, plenty of gates are original to pre-war houses and have settled so far out of square that a standard Ghost Controls arm travel setting simply can’t compensate. Our techs regularly grind and re-hang hinges rather than just adjust limit switches, a repair we see far more often here than in flatter neighboring towns. For owners of TSS1 and TDS2 openers, that means a sagging gate isn’t just a nuisance; it’s actively destroying the arm gears every cycle. We address the gate alignment first, then the opener, which is the order that keeps a repair from failing again in six months. That ordering is also what makes us the right independent shop for Ghost Controls sales & service across the Yonkers area.
Ghost Controls Models & Products We Service in Yonkers
We service the full residential Ghost Controls lineup you’re most likely to have on a Yonkers driveway: TSS1 Solar Single Swing Gate Opener Kits, TDS2 Dual Swing Gate Opener Kits, DEP2 Dual Swing Gate Opener Kits, and AXDP Automatic Gate Lock Kits. Our parts approach is straightforward: genuine Ghost Controls boards and arm motors for reliability, and quality aftermarket hinges, brackets, and gate locks where the aftermarket part holds up better to road salt and Hudson moisture. We repair boards and arms when the damage is isolated, but if a full motor replacement costs less than a second service call, we tell you that in plain words and show you both numbers before you choose.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Yonkers
Most Ghost Controls gate opener repairs in Yonkers run $185 – $390 before parts, depending on whether we’re replacing a control board, re-aligning a gate, or swapping an arm actuator. A full motor or board replacement lands higher, and we price that with the part cost spelled out separately so you see exactly where the money goes. What drives cost here is usually access: a steep Park Hill driveway with retaining walls takes more time to work safely than a flat lot. Every estimate includes a written price before any work starts, a written guarantee on the repair, and a free second visit if it fails within 365 days. Call (585) 496-2148 and tell us what the gate is doing wrong; we’ll quote it over the phone.
Serving Yonkers, NY - Our Local Coverage Area
We’re based in the Yonkers area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Yonkers
That pattern almost always means your solar panel isn’t charging the battery enough, usually because a Yonkers hillside or tree canopy shades the panel for part of the day. A battery that’s being undercharged will work when the panel gets full sun, then drain below the opener’s minimum voltage after a string of overcast days. We test the panel output and battery condition on-site, then recommend either relocating the panel, adding a second panel, or replacing a tired battery. Call (585) 496-2148 and we’ll diagnose it over the phone first.
Yes, and that’s one of the most common calls we get from Park Hill. Usually the limit switch has drifted because the post shifted during a freeze-thaw cycle, or the gate itself has sagged enough that the arm over-travels before it stops. We correct the mechanical alignment first, then recalibrate the Ghost Controls travel limits so the gate stops softly. If the gate has settled badly, we may need to re-hang the hinges, which is a half-day job on most Yonkers driveways.
Not necessarily. The first things we check on a TDS2 after a nor’easter are the control board connections and the fuse, because water pushed sideways by that kind of storm can find its way into the board enclosure along the Saw Mill and Bronx River corridors. A dead motor is actually the last item on our list, and we only condemn a motor after confirming the board, wiring, and arm gearing are all working. In many cases, one side stops because a hinge has rusted stiff and the opener is tripping its thermal overload, not because the motor failed.
We do. Narrow driveways with retaining walls are common through much of Yonkers, and they force us to think carefully about where the arm sits and how the gate swings. We’ve installed Ghost Controls kits on tight lots by using custom brackets and positioning the opener so the arm clears both the wall and the car, drawing on our Electric Gate Repair in Yonkers experience. We’ll come out, measure the site, and give you a written price before any work is scheduled.
For gates close to a sidewalk or a busy street, we mount the panel higher on the gate or on a post, use tamper-resistant hardware, and route the wiring through conduit so it can’t be yanked. We also recommend positioning the panel where it still gets sun but isn’t easily reached from the street side. If theft is a real concern, a hardwired power supply instead of solar is sometimes the cleaner answer, and we’ll price both options. Call (585) 496-2148 for a free estimate.
Service Areas Near Yonkers
Calder Gate Repair Yonkers serves the whole city, plus nearby areas including Mount Vernon, City Island, Morningside Heights, East Harlem, and New Rochelle. For readers just outside our core zone, we also offer Ghost Controls service in Mount Vernon and Ghost Controls service in City Island. If you’re not sure whether your address falls in our service area, call us, and we’ll tell you straight.
Book Your Ghost Controls Service in Yonkers Today
Tell us what the gate is doing wrong. We’ll tell you exactly what it needs and what it costs. No runaround. We answer calls live 24/7, and for repair calls we can often have a background-checked, uniformed tech at your Yonkers home the same day. Call (585) 496-2148 for a free estimate, or to book a repair.
Written by Nico Alvarez, Owner at Calder Gate Repair Yonkers, serving Yonkers and surrounding Westchester communities. Part of the Relay Home Co. family, established 2009, independently owned and operated under The Relay Visibility Guarantee.