Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Throgs Neck, NY
Gate repair in Throgs Neck usually costs between $180 and $650, depending on whether the problem is a seized hinge, a failed opener board, or a gate that’s sagged off its posts. Most repairs are done same day, and Calder Gate Repair always puts the price in writing before any work starts. What makes Throgs Neck different is the salt air: iron and steel corrode faster here than almost anywhere else in the Bronx, and gates that face the Long Island Sound take the worst of it. Call (585) 496-2148 and you’ll get a live person, not a voicemail.
Why Throgs Neck Homes Are Different
Throgs Neck is mostly single-family homes built between the 1920s and 1960s, with brick and wood-frame construction on narrow lots. The front gates are often ornamental steel or wrought iron mounted on brick pillars, and those pillars have had decades to settle and shift. That means a straight bolt-on repair rarely works here: the hinge plates need to be custom-spaced, shimmed, or re-drilled to match the angle of the post as it actually sits today.
The bigger issue is the salt. Homes within a few blocks of the Sound, especially along East Tremont Avenue and the side streets running down toward the water, absorb salt-laden humidity year-round. Nor’easters push wind-driven spray inland, and gates exposed to that air rust at the hinge pins and latch pockets first. In Throgs Neck, we regularly cut original hinges off with an angle grinder because they’ve seized solid from corrosion, then replace them with galvanized or stainless hardware that won’t do the same thing in three years. A gate that hasn’t been serviced in five or six years usually needs that kind of work rather than a simple adjustment.
Styles & brands we work with
Our Main Throgs Neck Services
Homeowners in Throgs Neck call us most often for two things: gates that won’t swing or slide properly, and electric openers that have stopped responding. Here’s what each service looks like in this neighborhood.
Gate Repair in Throgs Neck
Swing gates in Throgs Neck sag over time because the posts shift and the hinges stretch. A gate that scrapes the driveway or won’t latch is usually a hinge and alignment job, not a full replacement. We remove rusted hardware, refit the gate to the existing pillars, and install corrosion-resistant replacements where needed. If the gate is ornamental steel with rust through the lower rail, we’ll quote a welded patch before suggesting replacement. See Gate Repair in Throgs Neck for full pricing and what the repair includes.
Electric Gate Repair in Throgs Neck
Salt air doesn’t just attack hinges, it attacks wiring, limit switches, and control boards too. Electric gates in Throgs Neck most often fail because a limit switch, photoreceptor, or the main control board has corroded or shorted in the humidity. We trace the circuit first, identify the dead component, and replace only what’s actually failed. All work is done against a written quote before parts are ordered. Read more on Electric Gate Repair in Throgs Neck.
Gate Opener Repair in Throgs Neck
When a box opener stops responding or a slide operator won’t engage, Throgs Neck homeowners want to know whether they’re replacing a $40 limit switch or a $400 control board. We diagnose the specific opener on site and quote the repair before touching a wire. Most common brands, from Mighty Mule to LiftMaster, are factory-familiar to our technicians. For a full breakdown of opener symptoms and brand-by-brand costs, see Gate Opener Repair in Throgs Neck.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Throgs Neck
We work on the opener brands Throgs Neck homes actually have: LiftMaster, FAAC, Elite, and Mighty Mule, among others. Our trucks carry common replacement parts for these models, which shortens turnaround on most repairs. If a board or arm needs to be ordered, we’ll tell you the lead time and the exact cost before ordering. See our brands page for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Throgs Neck, NY
| Service | Typical range in Throgs Neck |
|---|---|
| Gate hinge replacement (pair) | $180 – $340 |
| Gate realignment / sag repair | $200 – $450 |
| Rusted latch replacement | $120 – $280 |
| Welded patch on ornamental steel gate | $250 – $600 |
| Limit switch replacement | $150 – $320 |
| Control board replacement | $350 – $750 |
| Photoreceptor replacement | $140 – $300 |
| Opener arm or bracket replacement | $200 – $480 |
| Full diagnostic service call | $89 – $149 |
What pushes a Throgs Neck price toward the top of a range is usually the age of the post or the extent of the corrosion: a hinge that has to be ground off and re-anchored in a crumbling brick pillar costs more than a straightforward swap. You’ll get a written line-item price before the work starts, and that’s the number on the invoice.
Neighborhoods We Serve in Throgs Neck
Our crews cover the full Throgs Neck peninsula, from East Tremont Avenue down to the water and over toward the Throgs Neck Expressway. That includes the blocks around Silver Beach, Locust Point, and the residential streets off Pennyfield Avenue. Most jobs are reached within 60 to 90 minutes of the call.
- Silver Beach
- Locust Point
- Pennyfield Avenue corridor
- East Tremont Avenue area
- Throgs Neck Expressway side
Service Area – Cities Near Throgs Neck
If you’re just outside Throgs Neck, we also serve Yonkers, NY, Mount Vernon, NY, City Island, NY, and Morningside Heights, NY. Calder Gate Repair coordinates all dispatch from our New York City office, so the same team and the same pricing model apply across the area.
Serving Throgs Neck, NY - Our Local Coverage Area
We’re based in the Throgs Neck area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Throgs Neck
Most Throgs Neck calls are reached within 60 to 90 minutes. If a gate is stuck open or won’t close, that’s a security issue and we treat it as a priority. Call (585) 496-2148 and a live person will book a window with a trackable arrival time.
For most hinge, opener, and latch repairs, no permit is required. If the gate posts themselves need to be reset or rebuilt, the city may require a permit depending on the scope. We’ll tell you if your job falls into that category before any work begins.
Yes. We service the entire peninsula, including Silver Beach, Locust Point, and homes along East Tremont Avenue and the side streets down to the Sound. There’s no extra fee for coastal streets; the salt air just means we quote for corrosion-resistant hardware from the start.
If your Throgs Neck gate won’t latch, won’t open, or is grinding metal on metal, call (585) 496-2148 for a free estimate. The price is in writing before anything starts, and every repair carries the 365-Day Done Right Promise.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Throgs Neck Customers Say
"Quote came in the app before the visit. No surprise at the end."
- Ginny L."Booking was easy and the job was done quickly."
- Seth R."Booked online. The tech texted his ETA and arrived on time. Gate opener was dead; he replaced the control board and tested the sensors."
- Terry W.