Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterPedestrian Gate in Yonkers, NY
A pedestrian gate is a separate, smaller gate built beside or within a larger driveway gate, sized for people to walk through rather than vehicles. In Yonkers, where many homes on streets like Central Park Avenue and McLean Avenue combine steep driveways with sidewalk access, a well-installed pedestrian gate keeps foot traffic controlled without opening the full driveway gate every time. Calder Gate Repair Yonkers installs, repairs, and automates pedestrian gates for homeowners across Westchester’s southern edge, from Getty Square up through Bryn Mawr and Dunwoodie. Call (585) 496-2148 for a free estimate on any pedestrian gate project. If you’re also considering a full driveway gate, our Gate Installation in Yonkers page covers the broader scope.
When You Need Pedestrian Gate
Most Yonkers homeowners don’t wake up thinking about pedestrian gates. Something triggers it. Here are the situations we see most often across the city:
- Your driveway gate opens fully every time someone walks up. Without a separate walk gate, every pizza delivery or mail carrier triggers the full 14- to 20-foot driveway gate. That’s unnecessary motor wear and a wider security gap than you need.
- You’re tired of squeezing through a gap between the gate and the fence. In older neighborhoods like Ludlow and Lincoln Park, gates were installed before modern security standards. A dedicated pedestrian gate fixes the awkward squeeze.
- Kids walk to school or the bus stop alone. Parents in Crestwood and Lawrence Park tell us they want a smaller gate so children don’t have to wrestle with a heavy driveway gate.
- Your existing pedestrian gate sags, won’t latch, or scrapes the ground. Yonkers winters with freeze-thaw cycles and road salt take a toll on gate posts and hinges. A gate that worked fine in September often won’t latch by February.
- You want keypad or intercom access for visitors without opening vehicle access. A pedestrian gate with its own keypad gives a cleaner entrance for guests, dog walkers, and landscapers.
- Your HOA or insurance carrier now requires a separate walk gate. Some Yonkers condo associations and insurers have tightened requirements around perimeter access. We install pedestrian gates that meet those standards.
Our Pedestrian Gate Process
Here’s how a pedestrian gate installation or repair works with Calder Gate Repair Yonkers, step by step:
- Call or book online. A live person answers (585) 496-2148 24/7. No voicemail tree, no chatbot. We take your address in Yonkers, ask a few questions about your current setup, and schedule a time that actually works.
- Site assessment. A background-checked, uniformed technician arrives with a live, trackable arrival time you can follow from your phone. We check post depth, gate weight, swing direction, ground slope, and access to power. In hilly areas like Nepera Park, slope matters more than most people expect.
- Written price before anything starts. You get a written estimate that breaks down materials and labor. The number on that paper is the number on your invoice. No surprises after the dig starts.
- Installation or repair. We build or fix the gate, hang it true, set the latch so it operates smoothly, and add automation if you want it. We work with LiftMaster, FAAC, and Elite pedestrian gate openers regularly, and we’ll recommend the right option based on your gate’s weight and how often it’s used.
- Walkthrough and documentation. We test the gate with you, show you how the latch, lock, and any keypad work, and send before-and-after photos along with a digital invoice you can pay from a link. This is the Relay Standard: live arrival time, photos, and a digital paper trail on every job.
- 365-Day Done Right Promise. Every pedestrian gate repair carries our written guarantee. If the repair fails within 365 days, Calder Gate Repair returns at no charge. That free second visit is included with every repair, not sold as an add-on.
Pedestrian Gate Pricing in Yonkers
Most pedestrian gate installations in Yonkers run $900 to $2,800 depending on the gate material, size, and whether you’re adding automation. Repairs are usually less. Here’s what moves the number:
- Gate material: Aluminum starts around $900 and resists rust, which matters near the Hudson River and in areas that see heavy road salt. Wrought iron or steel runs higher, typically $1,400 to $2,800, but offers more design options for homes in neighborhoods like Park Hill and Cedar Knolls.
- Automation: Adding a keypad and electric strike or a dedicated pedestrian gate opener from LiftMaster, FAAC, or Elite typically adds $500 to $1,200. A basic mechanical latch costs nothing extra beyond the hardware.
- Post work: If your existing gate post is rotted, leaning, or set in crumbling concrete, expect $200 to $500 per post for replacement. This is common in Yonkers where older fences predate modern footing standards.
- Repairs: A sagging gate, misaligned latch, or worn hinge typically runs $150 to $375. If a gate opener motor or control board fails, most repairs fall between $275 and $650 before any replacement parts.
Every quote is written and itemized before work begins. Call (585) 496-2148 and we’ll give you a number you can actually plan around. Estimates are free.
FAQs – Pedestrian Gate
How much does a pedestrian gate cost in Yonkers?
A basic aluminum pedestrian gate in Yonkers typically costs $900 to $1,500 installed, while steel or wrought iron runs $1,400 to $2,800, and adding an opener or keypad pushes the total higher. Your exact price depends on gate width, post condition, and whether you want automation. Call (585) 496-2148 for a written quote, free of charge.
Can you install a pedestrian gate next to my existing driveway gate?
Yes, in most cases we can build a pedestrian gate into or beside your current fence line without replacing the driveway gate. The key factors are available width, post integrity, and whether your current fence can support a new gate frame. We’ll tell you honestly during the site assessment if it’s workable.
What’s the difference between a pedestrian gate and a driveway gate?
A pedestrian gate is sized for people, typically 3 to 4 feet wide, while a driveway gate is built for vehicles and usually spans 12 to 20 feet. Pedestrian gates are lighter, cheaper to automate, and reduce motor wear on your driveway gate by giving walkers their own entrance. For a deeper look at the vehicle side, see our Gate Installation in Yonkers page.
Do you repair existing pedestrian gates or only install new ones?
We repair existing pedestrian gates all the time, including sagging gates, broken latches, worn hinges, and failed openers from brands like Mighty Mule and Elite. Every repair carries the 365-Day Done Right Promise, which includes a free return visit if the fix doesn’t hold within a year.
If you’ve got a pedestrian gate that needs work or you’re ready to add one, call Calder Gate Repair Yonkers at (585) 496-2148. A live person answers around the clock, the estimate is free, and the price you’re quoted is the price you’ll pay.
Written by Nico Alvarez, Owner at Calder Gate Repair Yonkers, serving Yonkers.