Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Scarsdale, NY
Scarsdale’s gate problems don’t look like the ones we see in other Westchester towns. The housing stock here skews older, grander, and heavier: cast iron driveway gates hung in the 1920s, thick wood swing gates on stone piers, and early electric openers that have been quietly corroding for forty winters. Salt, snow, and summer humidity work on hardware year-round. If your gate is sagging, grinding, or refusing to move, Calder Gate Repair handles it with written pricing before we touch a single bolt. Call (585) 496-2148 and you’ll speak to a live person, not a menu.
Why Scarsdale Homes Are Different
Scarsdale is defined by large pre-war and mid-century single-family homes on spacious lots, many of which still have their original cast iron or heavy wood gates. These aren’t lightweight aluminum panels from a big box store. They weigh a lot, and the mechanical stress on hinges, posts, and opener motors is constant. In Fox Meadow and Heathcote, we regularly see gates original to 1920s and 1930s Tudor and Colonial homes, with ornamental hinges and latch sets that were never designed to be replaced off the shelf. When those fail, the repair often means custom fabrication or careful restoration, not a quick part swap. That’s the core difference in Scarsdale: the gate is part of the property’s architectural character, and the fix has to respect that. Local ordinances around property appearance mean a mismatched replacement hinge or a visibly modern control box can draw a complaint. Weather compounds it. Freezing winters push road salt into post bases and hinge pins, accelerating rust. Humid summers swell wood and rot gate frames from the inside out. Any gate repair in Scarsdale has to account for both.
Styles & brands we work with
Our Main Scarsdale Services
Most Scarsdale calls to Calder Gate Repair fall into one of three buckets: mechanical gate repairs, electric gate system failures, and opener problems. Each service has its own Scarsdale page with pricing, local details, and what to expect. Here’s the short version.
Gate Repair in Scarsdale
A gate that drags on the ground or won’t latch in Scarsdale is usually a hinge, wheel, post, or frame problem, made worse by years of freeze-thaw cycles and salt exposure. Heavy wood and iron gates here put enormous weight on older hardware. We repair or replace hinges, weld cracked iron where the design allows for it, rebuild post bases, and realign sagging gates so they swing and seal properly. Full details, including local pricing breakdowns, are on the Gate Repair in Scarsdale page.
Electric Gate Repair in Scarsdale
Scarsdale’s electric gate systems often combine modern automation with decades-old gate hardware, and the failure point is rarely obvious. Power issues, dead keypads, safety sensors that stop working, and control boards that short after a storm are common calls. We trace the failure from the motor back to the power source, replace what’s failed, and test the full open-close cycle before we leave. See the Electric Gate Repair in Scarsdale page for specific symptom and pricing details.
Gate Opener Repair in Scarsdale
Scarsdale has a lot of early-generation openers still in service, and a surprising number of them are underpowered for the weight of the gate they’re moving. We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule units daily. Common Scarsdale opener repairs include stripped gears, failed limit switches (the small sensor that tells the gate when to stop), and receivers that have lost their programming. Read the full breakdown on the Gate Opener Repair in Scarsdale page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Scarsdale
Our technicians are factory-familiar with the openers found most often in Scarsdale: LiftMaster, FAAC, Mighty Mule, and Elite among them. We carry common boards, remotes, and sensors locally so most opener repairs don’t wait on a shipped part. The full brand list, including BFT, Linear, Viking, Ghost Controls, and DoorKing, is on our brands page.
Pricing for Gate Company in Scarsdale, NY
| Service | Typical range in Scarsdale |
|---|---|
| Gate opener repair labor (before parts) | $180 – $340 |
| Hinge replacement on a heavy wood gate | $150 – $400 |
| Post base stabilization | $250 – $600 |
| Weld repair on ornamental iron gate | $180 – $450 |
| Limit switch replacement | $110 – $220 |
| Receiver or remote programming | $75 – $150 |
| Control board replacement | $200 – $450 |
| Safety sensor replacement | $120 – $250 |
| Gate wheel or roller replacement | $95 – $220 |
In Scarsdale, prices run toward the upper end of these ranges when the gate is original to the home and requires custom fabrication, or when rust has frozen hardware in place and disassembly takes longer. What you’ll never see is a surprise: every Calder Gate Repair job starts with a written price agreed before work begins. The number on the invoice is the number you approved at the door.
See the difference
Before
After
Before
After
Before
AfterNeighborhoods We Serve in Scarsdale
We cover all of Scarsdale, including the neighborhoods where older ornamental gates are most common and where we take the most repair calls. Response time across the area is typically same day or next morning for urgent gate failures.
- Fox Meadow
- Heathcote
- Greenacres
- Quaker Ridge
- Edgewood
Service Area – Cities Near Scarsdale
Calder Gate Repair serves Scarsdale and the surrounding Westchester communities. If you’re just over the border, we’re already working nearby. See our pages for Eastchester, NY, Tuckahoe, NY, Dobbs Ferry, NY, and Mamaroneck, NY for local details in those towns.
Serving Scarsdale, NY - Our Local Coverage Area
We’re based in the Scarsdale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Scarsdale
For a gate stuck open or closed, we typically reach Scarsdale homes the same day or next morning. Dispatch is coordinated from our New York City office, with crews serving Scarsdale locally. When you call (585) 496-2148, you’ll get a live arrival window you can track, not a four-hour range.
Repairs to existing gates generally don’t require new permits, but some Scarsdale neighborhoods have architectural review rules about visible changes like a new control box or a replacement gate panel. If your property has a homeowners association with gate standards, we’ll match the repair to what’s already there.
We regularly repair the ornamental iron and wood gates found throughout Scarsdale, including homes in Fox Meadow and Heathcote with original 1920s and 1930s hardware. When a hinge or latch is no longer made, we fabricate or restore it to match. The opener side gets the same treatment: old and new systems both.
Contact Calder Gate Repair in Scarsdale
If your gate is sagging, stuck, or making a noise it didn’t make last month, call us at (585) 496-2148. You’ll get a live person, a written price before any work starts, and the 365-Day Done Right Promise on every repair we do in Scarsdale. Estimates are free.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Scarsdale Customers Say
"Booked online. The tech texted his ETA and arrived on time. Gate opener was dead; he replaced the control board and tested the sensors."
- Terry W."Swing gate arm replaced and aligned. Got photos of the old part by text."
- Nadia F."Solid work. ETA slipped by fifteen minutes, but I got a text."
- Holly B.