Sliding driveway gates
Wrought iron
Wood & steel frame
Farm & ranch
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterDriveway Gate in Yonkers, NY
Driveway gate installation in Yonkers means putting a solid, powered gate across your driveway entrance, connected to an opener that lets you get in and out without getting wet, fighting a frozen latch, or stepping out of the car on a hill. It’s not a weekend DIY project. The gate has to be set square on the posts, the posts have to be anchored for frost heave and the weight of the gate, and the opener has to be programmed so the gate stops where it should, reverses when it senses an obstacle, and doesn’t shake the hardware loose within a year.
Calder Gate Repair Yonkers installs driveway gates correctly the first time, draws a live arrival window, and puts every price in writing before the first hole is dug. We’re the gate specialist under the Relay Home Co. family, and we back every install with the 365-Day Done Right Promise: if the job isn’t right within 365 days, we return at no charge. Call (585) 496-2148 for a free estimate. For the full scope of what goes into this work, see our Gate Installation service page.
Key Takeaways
- Driveway gate installations in Yonkers typically run from $3,800 for a basic single-swing gate up to $12,000+ for a double-swing, custom-fabricated gate with a high-end opener like LiftMaster or FAAC.
- Yonkers winters and hills make frost-line anchoring and opener force calibration the two most common failure points we see on gates installed by general contractors.
- Every install from Calder Gate Repair Yonkers includes a written price before work starts, a written guarantee, and a free second visit if the work fails within 365 days.
- We’re factory-familiar with LiftMaster, FAAC, Mighty Mule, and Elite openers, so programming, troubleshooting, and warranty support are all handled in-house.
When You Need a Driveway Gate
A driveway gate solves more than one problem in Yonkers. Here are the situations where a homeowner usually calls us.
- Your driveway slopes right down to the street. Homes in Park Hill, Woodlawn Heights, and Dunwoodie often have driveways that slope toward the road. You’re tired of delivery trucks using your driveway as a turnaround, and a gate cuts that off.
- You have young kids or a dog and a busy street out front. Central Avenue and Jackson Avenue frontage homes sit close to traffic. A gate is a physical barrier, not just a reminder to be careful.
- You’re already replacing a manual gate. A gate that was installed years ago as a manual swing gate can often be retrofitted with an opener. In Yonkers, we see plenty of gates that were never automated and now feel like a hassle because no one wants to get out in February sleet.
- Your existing gate opener has failed and the whole gate is wobbling. When the posts are rusted at the base or the hinge welds are cracking, the opener is usually working harder than it should. That’s the point where replacement beats repeated repair.
- You’re tired of sitting in the car waiting for a gap in traffic on a hill. If your driveway meets the road at a blind curve or a steep pitch, an automated gate with a remote or keypad means you never stop halfway on the slope and fight gravity to get moving again.
- You’ve had a package stolen or a car broken into at the end of the driveway. Gates don’t make you invisible, but they make a driveway a much less attractive target. We hear from homeowners in Southeast Yonkers and Ludlow who install a gate specifically after one too many porch incidents.
Our Driveway Gate Process
- Phone walkthrough and honest price range. Call (585) 496-2148 and a live person answers, 24/7. We ask what kind of driveway you have, slope, gate width, surface, power access, and what bothers you most right now. You’ll get a real price range on that call, not a vague “we’ll have to come see it.”
- On-site visit with a written price. A background-checked, uniformed technician comes to your Yonkers home at a live, trackable arrival time, not a four-hour window. We measure, check the ground, test the power, and then hand you a written price before any work starts. That price is the price. If the job needs adjustments, we tell you before the work begins, never after.
- Gate and opener install. We set posts to the correct depth for Yonkers soil, hang the gate, install the opener (LiftMaster, FAAC, Mighty Mule, or Elite based on what fits your gate and budget), wire the safety sensors, and program the limits and force. We calibrate the gate to stop where it should, reverse on obstruction, and open smoothly on your slope.
- Setup, test, and walkthrough. We program remotes, keypads, and any phone app integration the opener supports. We run the gate through full cycles, test the obstacle reversal, and show you how to release the gate manually if the power goes out. We’ll also photograph the finished work, per the Relay Standard, so you have a visual record.
- Digital invoice and 365-Day Done Right Promise. You pay from a link, and you get a written guarantee on the work. If the gate or opener fails within 365 days, we return at no charge. That’s the promise. It’s in writing, every time, no fine print.
Driveway Gate Pricing in Yonkers
Most driveway gate installations in Yonkers land between $3,800 and $9,500. The final number depends on three things: the gate itself, the opener, and what’s already in the ground.
| Item | Typical Yonkers Range |
|---|---|
| Single swing gate (steel or aluminum, basic design) | $3,800 – $6,200 |
| Double swing gate (two panels, wider driveway) | $6,000 – $10,500 |
| Custom fabricated gate (ornamental, larger, heavier) | $7,500 – $12,000+ |
| Opener: Mighty Mule or Elite | $850 – $1,600 installed |
| Opener: LiftMaster or FAAC (heavy-duty, commercial-grade residential) | $1,400 – $2,800 installed |
| Post replacement (if existing posts are rusted or undersized) | $700 – $1,900 per post |
| Electrical run from house to gate | $500 – $1,800 depending on distance and conduit |
| Keypad, remote, phone app setup | $150 – $450 |
What moves the number: slope, gate width, whether we’re replacing posts, how far the power has to run, and the opener brand. A Mighty Mule opener on a flat 10-foot single gate in a Woodlawn Heights driveway will cost less than a LiftMaster LA400 on a steep 20-foot double gate in Park Hill. Yonkers soil is also a factor. We don’t set posts shallow. If the ground freezes, a shallow post shifts, the gate sags, and you’re calling us next spring with a hinge that’s pulling out of the concrete.
Every estimate is free. The price we quote in writing is the price you pay. We don’t surprise you with a change at the door. Call (585) 496-2148 and we’ll give you a real range for your specific driveway before anyone steps on the property.
FAQs – Driveway Gate
How much does a driveway gate cost in Yonkers?
Most driveway gate installations in Yonkers run $3,800 to $9,500, with custom double gates or heavy-duty openers pushing the total past $12,000. The biggest cost drivers are gate size, material, opener brand, and post work. Call (585) 496-2148 for a written, line-by-line price for your specific driveway.
Can you install a driveway gate on a sloped driveway in Yonkers?
Yes. Steep driveways are common in Park Hill, Dunwoodie, and along the Hudson, and they’re not a problem if the gate is hung properly. The key is post depth, hinge placement, and an opener with enough force capacity to move the gate uphill without straining. We install on slopes routinely and we calibrate every gate to the actual slope, not a factory default.
Do you need a permit for a driveway gate in Yonkers?
Often, yes. Yonkers building requirements vary by zone and by whether the gate is on a public right-of-way or a private driveway. We don’t file permits for you, but we’ll tell you what to check and what the planner will ask for, and we’ll be straightforward about the process. Better to ask before the gate is up than after the inspector leaves a notice on the door.
Is a driveway gate opener worth the extra cost?
For most Yonkers homeowners, yes. Without an opener, a gate is just a heavy barrier you have to get out and push. With an opener, you get a remote, a keypad, and depending on the brand, phone app control. We install Mighty Mule and Elite for straightforward residential jobs, and LiftMaster or FAAC for heavier gates or gates that are going to cycle many times a day.
What happens if the gate stops working after installation?
You call us and we come back. Every driveway gate installation from Calder Gate Repair Yonkers carries the 365-Day Done Right Promise: if the gate or opener fails within 365 days, we return at no charge. That’s in writing, on every job, no exceptions.
Call Calder Gate Repair Yonkers for Your Driveway Gate
If your driveway needs a gate, or your current gate is sagging and the opener is grinding, call (585) 496-2148. A live person picks up 24 hours a day. You’ll get a free estimate, a written price before work starts, and a gate that opens and closes the way it should on the first try. That’s the Relay Standard, and that’s how we do every install in Yonkers.
Written by Nico Alvarez, Owner at Calder Gate Repair Yonkers, serving Yonkers.