Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Gate Opener Repair for Yonkers Homeowners
A gate opener that grinds, groans, or won’t budge isn’t just an inconvenience, it’s a security risk for your whole property. Most gate opener repairs in Yonkers run between $180 and $340 before parts, and most are fixed in a single visit. Calder Gate Repair Yonkers has handled swing gates, slide gates, and underground openers across Westchester since 2009, and we answer the phone live at (585) 496-2148 any hour of the day or night.
We’re the gate opener repair specialists inside the Relay Home Co. family, trained on nine major brands including LiftMaster, FAAC, Mighty Mule, and Elite. Every job gets three guarantees in writing: a price before we start, a 365-Day Done Right Promise, and a free second visit if the repair fails. Nico Alvarez leads our Yonkers Gate Opener Repair team, and every technician arrives background-checked, in uniform, with a trackable arrival time.
Key Takeaways
- Most gate opener repairs in Yonkers cost between $180 and $340 before parts, and we quote the full price in writing before any work begins.
- We service nine major brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule.
- Every repair includes the 365-Day Done Right Promise: if it fails within a year, we return free of charge.
- A live person answers our phone 24/7 at (585) 496-2148. No voicemail, no chat bot, no phone tag.
- We serve all of Yonkers plus nearby communities like Mount Vernon, Scarsdale, and New Rochelle.
Styles & brands we work with
Gate Operator
A Gate Operator is the motorized unit that actually pushes or pulls your gate open and shut. Unlike the gate opener (the remote and receiver), the operator is the box mounted at the gate or in the ground that does the heavy lifting. In Yonkers, where driveways cut into hillsides and gates face seasonal freeze-thaw cycles, operators wear out faster than they do on flat properties in other parts of the country.
Calder Gate Repair Yonkers repairs, replaces, and tunes gate operators for residential and light commercial properties. Most operator repairs run between $200 and $340 before parts, depending on whether we’re replacing a capacitor, rebuilding a gearbox, or swapping a control board. We stock common parts for LiftMaster and FAAC units and can order anything unusual overnight.
When Your Operator Fails
An operator that hums but doesn’t move usually has a failed capacitor or a stripped gear. An operator that trips its breaker repeatedly may have a short in the wiring run or a seized motor. Both are repairable, and we’ll tell you the exact cost before we touch a single bolt.
If your operator is more than 12 years old and the repair estimate crosses $500 with parts, we’ll tell you straight: replacement may make more sense. We never push replacement on a gate that just needs a $40 limit switch.
Operator Replacement Decisions
When replacement is the right call, we quote a complete turnkey price that includes the new operator, mounting hardware, wiring, safety edges, and programming. No hidden line items. You see the full number before anything is ordered.
Electric Gate Closers
Electric Gate Closers are the spring-loaded or hydraulic arms that pull a gate shut after it’s been opened. They work in tandem with the opener, and when a closer fails, you get a gate that slams shut, creeps open, or won’t latch. Around Yonkers, the humidity and road salt carried in by vehicles from the Saw Mill River Parkway corridor accelerate closer wear, especially on swing gates near the street.
Calder Gate Repair Yonkers adjusts, rebuilds, and replaces electric gate closers on all gate types. Most closer repairs run between $180 and $280 before parts depending on whether we’re adjusting tension, replacing seals, or mounting a new closer arm. The work usually takes under two hours.
Adjusting Tension and Speed
A gate that closes too fast is a liability: it can hit a car, a child, or a delivery person. We set closer tension and speed so the gate latches reliably without slamming. This is a 30-minute adjustment that prevents real injury.
If a closer has been misadjusted repeatedly, that’s a sign of a deeper issue, like a bent hinge or a gate that’s drifted out of square. We check the whole system rather than just cranking the tension and leaving.
Replacing Worn Closers
When a closer leaks hydraulic fluid or the internal spring snaps, repair isn’t practical. We replace it with a properly rated unit and match the mounting footprint so you don’t end up with new holes in your gate post.
Gate Servicing
Gate Servicing is preventive maintenance: a systematic check, cleaning, and tune-up that catches small problems before they become 11pm emergencies. In Eastchester Gate Opener Repair territory and nearby Yonkers, where gates cycle constantly during morning and evening rush on streets like Central Park Avenue and McLean Avenue, a gate can easily rack up 300 open-close cycles a week. Servicing every 12 to 18 months is the single best way to avoid a failed opener at the worst possible time.
Calder Gate Repair Yonkers offers a comprehensive gate servicing visit for between $150 and $250 depending on gate type and size. That includes hinge lubrication, track cleaning, opener diagnostics, safety edge testing, and a written report with our recommendations. No upsell pressure: we give you the report and you decide.
What We Check
Every service includes a full diagnostic sweep of the opener, operator, closer, keypad, intercom, and safety sensors. We test obstruction detection by blocking the gate path with a measured force gauge, not just a gut check.
We also inspect the physical gate itself: hinges, wheels, guide rollers, and the chain or belt run. A gate that hangs crooked will destroy a new opener in months, so servicing starts with the structure.
Seasonal Service for Hudson Valley Weather
We recommend servicing in early spring and late fall. Road salt, snow melt, and spring rains all stress gate hardware differently, and a fall service means your gate is ready for the first freeze. We’ll also clear drain channels around underground operators in the Getty Square area and other low-lying Yonkers streets where standing water is common.
Gate Intercom
A Gate Intercom is the system that lets someone at your gate talk to someone inside the house, and usually includes a buzzer or release button to open the gate remotely. When a gate intercom goes down, visitors honk, delivery drivers leave packages at the curb, and you lose the ability to screen anyone at your property line. In Yonkers, where many homes sit above street level on hillside lots, a working intercom is the difference between convenience and walking down the driveway in the rain.
Calder Gate Repair Yonkers repairs and replaces gate intercom systems, from simple two-wire audio units to video intercoms with keypad release. Most intercom repairs run between $160 and $300 before parts, depending on whether we’re fixing wiring, replacing a handset, or swapping the outdoor call station. We also integrate intercoms with your existing opener so the release button actually opens the gate.
Audio and Video Systems
Older audio intercoms often develop crackling or dead audio after years of moisture exposure at the call station. We trace the wiring, replace the outdoor unit if the speaker cone has rotted out, and re-seal everything with weatherproof gaskets.
Video intercoms add a camera feed, and when the picture goes black but audio still works, it’s usually a failed camera module or a corroded connection at the gate. We repair existing systems rather than forcing you into a full replacement.
Keypad and Intercom Integration
Many Yonkers homeowners add a keypad alongside the intercom so the family can enter with a code while visitors press the call button. We program both to work with your opener’s control board, and we test the full path: press, ring, answer, release, gate opens. If any step fails, we fix it before we leave.
Gate Opener With Keypad
A Gate Opener With Keypad adds a numeric code entry pad to your gate system, so family members, landscapers, or dog walkers can open the gate without a remote or a phone call. Keypads are the most common entry point for water damage in Yonkers, especially on gates exposed to rain off the Hudson River or snowdrift from plow trucks. When a keypad stops responding, the opener itself is often fine.
Calder Gate Repair Yonkers installs, repairs, and reprograms keypad-equipped gate openers. Most keypad repairs or replacements run between $150 and $280 depending on whether we’re repairing wiring, swapping a weathered keypad, or reprogramming codes. We also add keypads to existing openers that never had one.
When Keypads Fail
A keypad that lights up but won’t accept codes usually has internal contact corrosion or a failed button membrane. A keypad that’s completely dark may have lost its low-voltage feed from the control board. Both are repairable in a single visit, and we’ll show you how to test it before we leave.
We also see backlit keypads that work fine during the day but fail after dark, which points to a failing LED driver. It’s a cheap fix, but only if someone tests the keypad at night, which few gate companies actually do.
Programming and Codes
We set primary and secondary codes, delete old codes from previous owners or contractors, and explain how to add or remove codes yourself. If you own a rental property in Yonkers, we can set a temporary code for a tenant and delete it when they leave.
Brands We Service
We carry OEM and factory-compatible parts for LiftMaster openers, the most common brand we see on Yonkers residential gates. Our techs have replaced LiftMaster control boards, limit switches, and gear kits hundreds of times, and we know which model years had capacitor issues that caused intermittent failures on cold mornings.
FAAC hydraulic operators appear on a lot of heavier swing gates in Yonkers, especially on properties with steel or wrought iron gates. We service FAAC pumps, solenoids, and lock actuators, and we stock the fluid these systems need when they’ve been run low. Mighty Mule and Elite openers show up on driveway gates all over Westchester, and we keep common sensors, remotes, and control boards for both on our trucks.
Whether you have a LiftMaster, FAAC, Mighty Mule, Elite, or any other make, we can help. If you’re not sure what brand is on your gate, call (585) 496-2148 and describe the control box; we can usually identify it over the phone.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- The gate reverses after opening a few feet. This usually means the obstruction sensor is misaligned or the force setting is too low. In Yonkers, leaves and ice along the gate track can trip the sensor, but if it recurs daily, the opener’s control board is likely failing.
- The opener hums but the gate doesn’t move. That’s a seized motor, a snapped belt, or stripped gears. Running it anyway can burn out the motor completely. Shut the breaker off and call us.
- The gate slams shut or creeps open on its own. A failed electric gate closer or a broken spring is to blame. A gate that closes uncontrolled is a genuine safety hazard, especially on properties with kids or pets.
- Your keypad or intercom stops responding. If the keypad is dead but the remote still works, the problem is isolated to the keypad or its wiring. If both fail, the control board may have fried after a power surge or a lightning strike.
- The gate cycles open and shut on its own. This is usually a shorted wire, a stuck relay, or a corroded connection in a junction box. It drains the operator’s motor and can leave your property open all night.
Our Process, Step by Step
- 1
You call, a person answers. Call (585) 496-2148 any time, day or night, and describe what the gate is doing. We ask a few specific questions to narrow the likely cause before we send anyone out.
- 2
You get a trackable arrival time. We confirm your address in Yonkers, assign a technician, and send you a live tracking link. You’ll know who’s coming and exactly when, not a four-hour window.
- 3
The tech diagnoses and explains. On site, the technician tests the opener, operator, safety edges, keypad, intercom, and power feed. Then they explain what’s wrong in plain language, show you the failed part if you want, and give you a written price before any work starts.
- 4
We repair and verify. After you approve the quote, we complete the repair and run a full test cycle: open, close, obstruction reversal, keypad, intercom, and remote. We don’t leave until everything works and you’ve seen it work.
- 5
You get a digital invoice and the 365-Day Done Right Promise. Your invoice arrives by text or email and is payable from a link. It includes the written guarantee: if the same repair fails within 365 days, Calder returns at no charge. If we can’t fix it correctly, the second visit is free, period.
How Much Does Gate Opener Repair Cost in Yonkers?
Most gate opener repairs in Yonkers fall between $180 and $340 before parts. A keypad replacement typically runs $150 to $280. A gate intercom repair lands between $160 and $300. A full gate servicing visit is $150 to $250. These are the numbers we quote over the phone and they’re the numbers you’ll see on the invoice. Parts are always itemized separately at cost.
What affects the final price? Gate type, for one: slide gates and underground operators take longer to access than surface-mounted swing gate operators. Brand matters too: some FAAC and LiftMaster boards cost more than entry-level Mighty Mule equivalents. Distance from the street to the control box affects wiring repair cost, and gates that haven’t been serviced in years often need hinge or track work in addition to the opener repair itself.
The easiest way to avoid overpaying is to get a written price before anything starts, which is exactly how we operate. Every estimate is free, and every repair is quoted up front. If the tech finds a second problem during the repair, they’ll call you with a revised number before touching it. You’ll never open an invoice that’s higher than the price you agreed to at the door.
Our Service Area Near Yonkers
Calder Gate Repair Yonkers covers all of Yonkers, from Getty Square to McLean Heights, plus the surrounding communities where our customers live and work: Gate Opener Repair in Mount Vernon, Gate Opener Repair in City Island, New Rochelle, Scarsdale, Mamaroneck, Kingsbridge, Pelham Bay, Throgs Neck, Morris Park, Morningside Heights, and East Harlem. Most appointments in Yonkers are scheduled same-day or next-day, and we’ll give you a live, trackable arrival time when you book.
Serving Yonkers, NY - Our Local Coverage Area
We’re based in the Yonkers area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Gate Opener Repair in Yonkers
Gate Opener Repair is the diagnosis and fixing of any component that opens or closes your gate: the operator, the opener control board, the remote receiver, the safety sensors, the keypad, the intercom, and the closer. Calder Gate Repair Yonkers handles all of it. We begin with a full diagnostic, explain what’s wrong, and quote a written price before any work starts. Call (585) 496-2148 if your gate won’t open, won’t close, or won’t stop moving.
Most repairs in Yonkers and nearby Gate Opener Repair - Tuckahoe take between one and three hours on site. Simple fixes like a keypad swap or a limit switch adjustment are often under an hour. If we need to order a part that isn’t on the truck, we’ll tell you the expected day and schedule a return visit; the second trip for that same repair is always free under the 365-Day Done Right Promise.
Most repairs run between $180 and $340 before parts. That includes the diagnostic, the labor, and the full system test. Parts are itemized and quoted separately before we install anything. For an exact quote on your gate, call (585) 496-2148; estimates are free and there’s no obligation.
Yes, LiftMaster is one of the nine brands we service regularly across Yonkers. We stock common LiftMaster control boards, remotes, gear kits, and limit switches, and we know the model-year quirks that cause cold-weather failures. We also service FAAC, Mighty Mule, Elite, and five other major brands.
In most cases, yes. We prioritize security failures and safety hazards, and a gate that won’t close leaves your property exposed. Call (585) 496-2148 and a live person will tell you what’s available today. We don’t use voicemail and we don’t make you wait for a call back. If the gate can’t be secured before we arrive, we’ll walk you through a temporary measure over the phone.
Every repair carries the 365-Day Done Right Promise in writing. If the repair fails within 365 days, Calder Gate Repair Yonkers returns at no charge and makes it right. There’s no prorating, no fine print, and no service fee for the return visit. The guarantee is on every job, always included, never optional. For questions about coverage, call (585) 496-2148.
Clear the area around the gate and the opener so the technician has room to work: pull cars back, move trash bins, and trim back any bushes that have grown over the track. If the gate has a disconnect lever or an emergency release, leave it in its current position unless the gate is stuck open in a dangerous way. Have your remote or keypad code handy. And make sure we have a phone number where we can reach you during the visit; we’ll call if we find anything unexpected before we touch it. For anything else, call (585) 496-2148.
Schedule Your Gate Opener Repair Service in Yonkers Today
Your gate is a moving piece of security equipment, and a repair delayed is a property left open. Call (585) 496-2148 now for a free, no-obligation estimate. A live person answers 24/7, and we’ll give you a written price before any work begins. Gate Opener Repair in Yonkers doesn’t have to wait until Monday. Calder Gate Repair Yonkers is ready when you are.
Written by Nico Alvarez, Owner at Calder Gate Repair Yonkers, serving Yonkers and Westchester County since 2009.