Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Eastchester
When an electric gate stops opening in Eastchester, you need someone who understands what they’re walking into before they even ring the bell. Calder Gate Repair Yonkers handles automatic gate repair across Eastchester’s distinctive housing stock every week: narrow driveways, stone pillars from the 1930s, original wrought iron that’s been swinging since before the Taconic Parkway was paved. Most electric gate repairs in Eastchester run $220 – $480 for typical opener and sensor work, and we give you a written price before we touch a single bolt. Call (585) 496-2148 and a live person answers, day or night.
Why Calder Gate Repair Yonkers Is Eastchester’s Preferred Electric Gate Repair Company
We’re not a general handyman service that occasionally looks at a gate. Electric Gate Repair is what we do, all day, every day. Our technicians have worked on the exact gates Eastchester homeowners own: LiftMaster operators bolted beside 1940s brick piers, FAAC rams tucked behind boxwood hedges on Garth Road, Mighty Mule kits retrofitted onto estate gates off White Plains Road. That matters because a gate on a stone pillar doesn’t fail the way a gate on a standard post does. We know to check the footing, not just the motor.
Every Eastchester job runs through the Relay Standard, named for the Relay Home Co. family we’re part of, established in 2009. You get a live, trackable arrival time, a background-checked technician in uniform, before-and-after photos, and a digital invoice you pay from a link. The price we quote at the door is the price on the invoice. No adjustment after the fact. That’s written, not implied, on every single repair.
Nico Alvarez, who leads our repair crews, is factory-familiar with nine major opener brands. That depth shows up on jobs where a lesser tech would swap parts blindly and hope. In Eastchester, where so many gates hang from original stone or brick, the difference between a fix that lasts and one that fails next spring is often whether the tech understood the footing, the hinge geometry, and the operator’s duty cycle together.
Styles & brands we work with
Automatic Gate Repair in Eastchester
Automatic gate repair in Eastchester typically means one of two things: the gate moves on its own, or it doesn’t move at all. Both connect back to the opener, which is the motor and control system that swings or slides the gate. When we arrive, we start with the opener’s control board, then the safety sensors, then the mechanical assembly. On Eastchester’s narrow driveways, a misaligned photocell or a limit switch that’s drifted by half an inch is often the whole story.
Opener Troubleshooting and Repair
We test the full circuit: control board, remote receiver, keypad, and the motor itself. Many opener failures in Eastchester trace back to a limit switch, the small sensor that tells the gate when to stop. A quarter-inch drift and the gate slams into its stop, runs too long, or reverses mid-cycle. We set these precisely, not “close enough.”
Sensor and Safety System Work
Safety photocells and loop detectors are the most weather-exposed parts on any Eastchester gate. Frost, humidity, and decades of seasonal movement loosen their mounts and throw off alignment. We clean, re-align, and where needed, replace them with properly sealed units. It’s the kind of repair we do same-day when weather permits.
Electric Gate Motor in Eastchester
Electric gate motor repair in Eastchester is often about the motor fighting a gate that no longer fits its opening. When freeze-thaw cycles heave a stone pillar even half an inch, the gate binds and the motor draws excessive current trying to push it. A motor that “burns out” is usually a motor that’s been overworked by a mechanical problem nobody addressed. We find that root cause before replacing anything.
Motor Replacement on Older Installations
When a motor has truly failed, we don’t just bolt in whatever fits. On Eastchester gates from the 1920s through the 1950s, the mounting plate, hinge geometry, and gate weight all differ from modern spec. We select an operator rated for the gate’s actual weight and duty cycle, then adjust the torque limits and travel stops to match.
Control Board and Limit Switch Work
Rack and pinion systems on mid-century gates wear unevenly at the post end. That wear throws off the limit switch calibration and can cause sag correction to fail repeatedly. Unless the post footing is rebuilt, the new correction won’t hold. When we see this in Eastchester, we tell you plainly: a $40 limit-switch adjustment won’t fix a failing footing. We show you the photos, explain the options, and quote both paths honestly.
Trusted Brands We Service in Eastchester
We’re factory-familiar with the brands Eastchester homes actually have. LiftMaster on estate driveways off Lakeshore Drive. FAAC on older Italian-style installations. Mighty Mule on long, narrow lots where homeowners upgraded affordably. Parts for these systems are stocked locally, so we don’t have to wait on a warehouse in another state. That means faster turnaround on control boards, remotes, and receiver modules. If we don’t have a part on the truck, we’ll tell you when it arrives and schedule the second visit before we leave the first one.
Common Electric Gate Repair Problems We See in Eastchester Homes
- Freeze-thaw heave on stone pillar footings. Eastchester winters push ground up unevenly, slowly twisting the pillar. The gate then binds against its stops and the motor overloads. We see this most on original early-20th-century piers.
- Wooden gates swelling in summer. Humidity makes the gate thicker and heavier. Photocell alignment shifts and the gate falsely reverses. We adjust for the season and set the sensor mounts with proper tolerance.
- Worn rack and pinion systems on mid-century gates. The rack wears faster at the post end because that’s where the most torque lands. Simple sag correction won’t hold if the footing has shifted, and we check for that before assuming the rack is the only problem.
- Control board failures after power surges. Eastchester’s older wiring and overhead lines can spike during storms. We see fried relay boards on brands like Linear and Mighty Mule more often after heavy weather. A surge protector at the panel is a cheap insurance we recommend often.
See the difference
Before
After
Before
After
Before
AfterPricing for Electric Gate Repair in Eastchester, NY
Most electric gate repairs in Eastchester run $220 – $480 before parts. A safety sensor realignment is on the lower end. Replacing a control board usually lands between $350 and $600, including programming. A full motor replacement, depending on brand and gate weight, typically runs $800 – $1,400 installed. The exact number depends on what we find, but you’ll see it in writing before any work begins. Estimates are free. If a repair fails within the 365-Day Done Right Promise window, we return at no charge, no debate.
We Also Serve Cities Near Eastchester
Our Eastchester service area extends to communities nearby. We regularly dispatch to Tuckahoe, Scarsdale, New Rochelle, and Yonkers with the same written-price guarantee and live arrival tracking. If you’re on the edge of Eastchester or a neighboring town, call us, and we’ll tell you exactly when a tech can be there.
Serving Eastchester, NY - Our Local Coverage Area
We’re based in the Eastchester area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Eastchester
Freeze-thaw cycles heave the ground under the pillar, gradually shifting it. The gate binds and the operator forces it, which accelerates wear. The fix is often a rebuilt footing, not a bigger motor. We’ve done exactly this kind of repair on Garth Road and similar Eastchester streets. Call (585) 496-2148 to have us assess the pier.
Yes. We use compact operators that mount low and discreetly, often hidden behind existing stone work or landscaping. We match brackets and hardware to the gate’s period look, and we can often reuse the original hinge points. The gate’s appearance stays; the automation does the work. That’s the kind of retrofit we do regularly in Eastchester.
Yes, it’s common in Eastchester. Humidity adds thickness and weight, and the gate’s movement shifts slightly. Photocells that were aligned in dry weather fall out of line. We re-align and, if needed, adjust the sensor mounts with more travel tolerance. A seasonal tune-up usually solves it for the year.
The motor is likely overloaded by a mechanical bind. On narrow Eastchester lots, the gate often rubs against a shifted pillar or a swelled gate edge. Continuing to run it this way will kill the motor. We diagnose the bind, free it, and then confirm the motor’s output is still within spec. Call us before the motor fails entirely.
For repairs, usually not. Rebuilding a stone pillar footing or making significant structural changes can trigger historic district review, and we’ll flag that if it applies to your property. Most motor replacements, sensor swaps, and control board repairs don’t require permitting. We’ll tell you exactly where your job lands before we quote.
Call Calder Gate Repair Yonkers for Electric Gate Repair in Eastchester
If your gate is down, slow, or refusing to close, call (585) 496-2148. A live person answers, takes the details, and gives you a real arrival window you can track. Every Eastchester job carries a written price before work, a written guarantee, and the 365-Day Done Right Promise behind it. That’s not marketing. It’s the Relay Standard, and it’s how we’ve worked since 2009.
Written by Nico Alvarez, Owner at Calder Gate Repair Yonkers, serving Eastchester, NY and surrounding communities since 2009.